THE LEVEL OF FRICTION FORCE REDUCTION IN SLIDING MOTION VERSUS THE AMPLITUDE AND FREQUENCY OF TANGENTIAL VIBRATIONS
Journal Title: Tribologia - Year 2016, Vol 267, Issue 3
Abstract
This work presents the results of comparative analyses of the influence of tangential longitudinal and tangential transverse vibrations on friction force in sliding motion. The analyses were conducted in the function of two principal vibrations parameters such as the frequency f and amplitude u0. It has been demonstrated that, during longitudinal vibrations, the amplitude va of their velocity constitutes a key parameter on whose magnitude the initiation of reduction in friction force depends. However, the level of the reduction cannot be determined unequivocally based on the magnitude of this parameter alone. Analyses were carried out in the Matlab-Simulink environment with the use of our own original models and computational procedures utilizing Dahl’s, Dupont’s and LuGre dynamic friction models for the description of friction force. The results of simulating analyses were experimentally verified.<br/><br/>
Authors and Affiliations
Mariusz LEUS, Paweł GUTOWSKI
Keywords
Related Articles
- EP ID EP246191
- DOI 10.5604/01.3001.0010.7299
- Views 28
- Downloads 0
THE INFLUENCE OF THE CONDITION OF THE SURFACE LAYER ON TRIBOLOGICAL PROPERTIES SPHEROIDAL FERRITIC CAST IRON AFTER PRESSING
In this paper the results of the investigations of tribological properties of cast iron after grinding and pressing have been presented. The experiment was conducted by the help of the machine Amsler 135. As a lubricant...
TECHNOLOGICAL AND TRIBOLOGICAL ASPECTS OF PRECISE MACHINING
This paper is a presentation of chosen issues concerning the optimization of technological quality of machined microproducts. Machining of thin wall aluminum objects (wall thickness below 0,1 mm and a few mm in height) a...
STRESS IN CONTACT OF TEETH GEAR WITH COATED MATERIAL
Due to the increased interest amongst tooth gear manufacturers for an adequate method of stress field controlling, this paper presents an analysis of the applicability of Hertz theory to the case of contact of the elemen...
MODELING THE RELATIONSHIP BETWEEN ADDITIVES AND TRIBOLOGICAL PROPERTIES OF LUBRICANTS
The article presents the statistical analysis of the research results concerning the influence of the commercial AW and EP additives on the tribological properties of lubricant that was produced based on mineral oil. The...
THE EFFECT OF teeth CORRECTION IN AN ARCHIMEDES WORM GEAR ON THE CONTACT STRENGTH, WEAR, AND LIFE OF THE WORM GEAR TEETH
The paper presents a method for determining the effect of teeth correction in an Archimedes worm gear on the contact strength, wear, and life of teeth of the worm wheel. The regularities regarding the effect of correctio...