THE MAIN INVENTIONS FOR TECHNOLOGIES OF THE MAGNETIC-PULSED ATTRACTION OF THE SHEET METALS. A BRIEF REVIEW
Journal Title: Електротехніка і Електромеханіка - Year 2018, Vol 0, Issue 3
Abstract
Purpose. The description of the Equipment for the Magnetic-Pulsed Attraction (or EMF-attraction) of the sheet metals which allows non-contact deforming of ferromagnetics (the low carbon steels, for example), the non-magnetic billets from aluminium alloys and the practical realization of the new advanced technologies in the modern processing manufacture. Methodology. Comparative analysis of characteristics and operating conditions of the systems under consideration. Results. Physically, all magnetic-pulsed methods of attrac-tion are based on the Lorentz repelling forces decreasing and on increasing the attracting forces when the sheet billets being deformed are transparent for the low working frequency acting electromagnetic fields. The ferromagnetic samples attraction is caused by their magnetic properties. For the non-magnetic metals attraction an accessory conducting screen is being introduced in construction of the inductor system which is the method tool. In this case the attraction effect is caused by the force interaction of the unidirectional currents induced in the screen and in sheet billet. The different constructions of the attracting tools attended for fulfilling the different production operations (for example, it can be stamping, flattening etc.) with metals owning by different electrophysical properties are represented. Originality. The novelties in the magnetic pulsed installations used as the power sources in the complex equipment for the automobile bodies repair are given. Practical value. The practical application of the elaborated systems for the dents removing in the sheet metals are suggested and successfully approbated. In the whole these works can be considered as new scientific direction and used for different manufacturing aims though the main attention is paid to the practical application in the field of the automobile bodies repair. The most part of the described inventions is defended by the Ukrainian Patents (23 from total quantity – 33 References) and little known to the west specialists in the area of the magnetic pulsed technologies. From the authors view point this is a main particularity and usefulness of the present paper.
Authors and Affiliations
Yu. V. Batygin, E. A. Chaplygin, S. A. Shinderuk, V. A. Strelnikova
Keywords
Related Articles
- EP ID EP487641
- DOI 10.20998/2074-272X.2018.3.06
- Views 65
- Downloads 0
NEW APPROACHES AT CONSTRUCTION OF MAGNETIC CONDUCTORS FOR MAINS TRANSFORMERS
It is carried out exploration and the assaying of new approaches at construction of stacked laminated cores of mains transformers which consists in simultaneous application in a magnetic conductor of the anisotropic and...
MODIFICATIONS OF DIODE RECTIFIER CIRCUITS FOR CONTINUOUS INSULATION MEASUREMENT IN LIVE AC IT NETWORKS
Purpose. In the paper there are described few systems of insulation resistance continuous measurement using an imposed DC test signal delivered by diode rectifiers. Drawbacks of this technique are pointed out and ways of...
THE DEVELOPMENT OF THE THEORY OF INSTANTANEOUS POWER OF THREE-PHASE NETWORK IN TERMS OF NETWORK CENTRISM
Purpose. Information technologies allow multidimensional analysis of information about the state of the power system in a single information space in terms of providing network-centric approach to control and use of unma...
THREE-ELECTRODE AIR SWITCHBOARD WITH THE GRAPHITE ELECTRODES OF KATG-50 ON VOLTAGE TO ±50 KV AND IMPULSE CURRENT BY AMPLITUDE TO ±220 KA
Purpose. Development and creation of the simplified construction of a high-voltage heavy-current air three-electrode switchboard with graphite electrodes, intended for operation in composition the powerful generator of l...
STUDYING THE EFFECT OF AN ADDITIONAL ACTIVE RESISTANCE IN THE FIELD WINDING CIRCUIT ON STARTING CHARACTERISTICS OF SALIENT-POLE SYNCHRONOUS MOTORS
On the basis of the developed method for calculating steady-state asynchronous operation modes of salient-pole synchronous motors, a procedure of mathematical modelling of the starting characteristics is proposed. The pr...