The method of analys of reliability of the system of air signals based on frequency pressue sensors
Journal Title: Механіка гіроскопічних систем - Year 2015, Vol 0, Issue 29
Abstract
The system of air signals (SAS) is intended for the issue of main aerobatic information on indicators of instrumentation in the cockpit and on-board systems. Under the reliability of SAS we understand property systems remain operational continuously for a certain time or a certain operating time. This feature is especially important for objects, refusal to work is related to danger to life. In many technical systems determining parameter (DP), which dominates as the "weakest link" in terms of parametric reliability, that is a quantitative measure of quality, has the ability to change over time and beyond the permissible limits. In the SAS at the frequency of air pressure sensors DP is such a frequency output sensors. The relevance of the study is that the method allows to find time to failure SAS, which will allow for practice time to prevent rejection, as well as control the frequency-dependent system, spending adjustments or changing operating conditions of the system. The goal of research is to develop a method for the analysis of parametric reliability of SAS frequency pressure sensors to improve the economic efficiency of the known methods of reliability analysis. Object is a parametric reliability SAS. The subject is research a system of air signals based on frequency pressure sensors. The novelty of the method is that instead of the number of the objects used for the first time the number of intervals of one research facility, which greatly improves the cost-effectiveness of the method. Practical application of the method is that having information about the real meaning of time to reach DP limit the design phase of SAS frequency pressure sensors can determine experimentally and analytically calculate parametric indicators of reliability of the system, that make a reasonable forecast of future performance.
Authors and Affiliations
Олена Миколаївна , Нечипоренко, Артур Олександрович Будім
Keywords
Related Articles
- EP ID EP540216
- DOI -
- Views 52
- Downloads 0
НОВИЙ ПІДХІД ДО НОРМУВАННЯ ПОХИБОК ЗАСОБІВ ВИМІРЮВАННЯ ПАРАМЕТРІВ ЯКОСТІ ЕЛЕКТРОЕНЕРГІЇ
Висвітлено проблеми, пов’язані з запровадженням стандарту на норми якості електроенергії. Обгрунтовано необхідність підвищення точності вимірювання параметрів якості. Показано недоліки стандарту щодо нормування похибок з...
Determination of laser shaping parameters from hardened duralumin
Purpose. The purpose of the article is to identify the areas of repeated laser treatment options of AA2024-T4 alloy and the impact to the stability of its initial properties, and to indicate the causes reduction in the s...
The trajectory calculation system of unmanned aerial vehicle based on optical camera
The trajectory calculation system based on optical camera calculates the current coordinates of the aircraft position, analyzing the video information by comparing the sequence of images. In this system, the «KAZE» detec...
Энергетические затраты на комбинированный увод крупногабаритного космического мусора c учётом динамически изменяющейся атмосферы Земли
<p>Проведено имитационное моделирование увода крупногабаритных объектов космического мусора с круговых экваториальных и солнечно-синхронных орбит высотой до 1500 км. Получены зависимости высоты перигея первого витка орби...
РАЗРАБОТКА ЭЛАСТОМЕРНОГО МАТЕРИАЛА ДЛЯ ВНУТРЕННЕГО ТЕПЛОЗАЩИТНОГО ПОКРЫТИЯ РАКЕТНОГО ДВИГАТЕЛЯ ТВЕРДОГО ТОПЛИВА
<p>В статье отражены основные результаты работ, связанные с разработкой рецептурного состава и технологии изготовления эластомерного материала, используемого при изготовлении внутреннего теплозащитного покрытия корпусов...