The Method of Signal Processing when Measuring Non-stationary Values
Journal Title: Energy Engineering and Control Systems - Year 2015, Vol 1, Issue 1
Abstract
Nowadays the problem of quick-changing non-stationary values measurement is extremely actual in various modern technical systems (parameters control of engine combustion chamber, testing of aerospace complex products, scientific researches etc.). There are sufficiently effective ways of such measurement. However, increase in the speed of such methods is needed urgently. The attempt of finding the new approach to the problem of sensor output signal processing when measuring non-stationary values using the example of non-stationary pressure measurement by piezoresistive sensors is presented. Piezoresistive sensors of diaphragm type are widely used in pressure measurement in the high-speed automatic systems.
Authors and Affiliations
Myroslav Tykhan, Orest Ivakhiv, Vasyl Teslyuk
Keywords
Related Articles
- EP ID EP253645
- DOI 10.23939/jeecs2015.01.057
- Views 95
- Downloads 0
Heat Exchange between Thermometer Well and Pipe Wall in Natural Gas Metering Systems
This paper deals with the accuracy of gas flow temperature measurement in natural gas metering systems. The effect of heat exchange between thermometer well and the pipe wall on the accuracy of gas flow temperature measu...
Microwave Device for Obtaining Extracts from Plant Materials
A method for obtaining biopesticides from plant materials based on application of a microwave electromagnetic field in the process of extraction is being studied. The article presents results of an experimental study of...
Gas Dynamical Capillary Flowmeters of Small and Micro Flowrates of Gases
The possibility of application of glass capillary tubes (CTs) as sensors of small and micro flowrates of gases was justified. The accuracy of a number of CTs flowrate equations was analyzed on the basis of experimental s...
Reduction of Hydrodynamic Flow Measurement Error of Chordal Ultrasonic Flowmeter
In this work, ways of reducing the hydrodynamic flow measurement error of chordal ultrasonic flowmeter for the distributed location schemes of their acoustic paths are investigated. The method of calculating optimal loca...
Determination of Hydro-Erosion Wear Coefficient for Sealing Elements of Pipeline Fittings
A model of hydro-erosion wear of sealing elements was constructed taking into account a set of parameters that reflect the physical properties of the fluid and the material of the sealing elements, as well as the design...