The Microstructure and Characterization of TiN Coatings Prepared by Physical Vapour Deposition (PVD)
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
Titanium nitride (TiN) possesses excellent property as corrosion resistance, aesthetic appear Titanium nitride (TiN) is being used for coating materials on SS, Mild steel. Since many techniques are there amongst, reactive DC magnetron sputtering has many advantages to deposit ceramic coatings using metallic targets. In the present work, our main aim is to improve the hardness of mild steel. The titanium of 2’’ diameter and 3 mm thickness is used as a target (99.99 % purity) for the deposition of TiN coatings. The micro structural, mechanical and wear properties are investigated using XRD, SEM, Vicker hardness tester and pin on disc respectively
Authors and Affiliations
N. Lenin Rakesh, Dr. K. Balasubramanian, J. Roshan, R. Sarvana Kumar, S. Raj Prakash
Keywords
Related Articles
- EP ID EP656969
- DOI 10.24247/ijmperdaug2019132
- Views 91
- Downloads 0
Control of Boundary Layer Build-Up in an Impeller
The operation of the power producing engine is directly proportional to smooth and efficient compressor operation. The efficiency of an engine is directly related to the compression ratio of the compressor and expansion...
Design and Testing of Rocket Motors with Composite Propellants
In space missions, satellite launchings and missiles for army applications, solid rocket motors plays a major role. As we know that the thrust produced by the rocket engines only gives the forward motion to the rocket bo...
CFD Simulation of Solar Loading in Car
A frequent problem faced by the car drivers in Chennai is, the hot suffocating inner of the car following hours of steady solar radiation when parked in an un-shaded area. The heat build-up in the cabin due to solar radi...
Mechanical Behavior of AL 7075 Reinforced with Al2O3 and SIC Nano Particles Fabricated by STIR Casting Method
Demand increases in a global range of the new brand products at national and International level. The metal matrix Nano composites are highly useful in many applications such as aerospace, automobile, military and variou...
Computational Analysis of Flow Over Bluff Bodies using Aero Spikes
This paper presents the computational analysis of the effect of aero spikes on bluff bodies. In the present study, a blunt nosed model was designed with and without spike. Two different shaped spikes were chosen for our...