The Modelling of Surface Roughness After the Turning of Inconel 601 by Using Artificial Neural Network
Journal Title: Journal of Materials and Engineering - Year 2023, Vol 1, Issue 4
Abstract
This research includes longitudinal turning of Inconel 601 in a dry environment with PVD coated cutting inserts. Turning was performed for different levels of cutting speeds, feeds, depth of cuts and corner radius. After turning, the arithmetical mean surface roughness was measured. Mean arithmetic surface roughness values ranging from 0.156 μm to 6.225 μm were obtained. Based on the obtained results, an artificial neural network (ANN) was created. This ANN model was used to predict surface roughness after machining for different variants of input variables. Performance evaluation of the generated model was performed on the basis of additional - confirmation experiments. The mean absolute errors are 0.005 μm and 0.012 μm for the training and confirmation experiments, respectively. The mean percentage errors are 0.894 % and 1.303 % for the training and confirmation experiments, respectively. The obtained results showcase the possibility of practical application of the developed ANN model.
Authors and Affiliations
Goran Jovicic, Aleksandar Milosevic, Mario Sokac, Zeljko Santosi, Vladimir Kocovic, Goran Simunovic, Djordje Vukelic
Keywords
Related Articles
- EP ID EP727425
- DOI 10.61552/JME.2023.04.006
- Views 20
- Downloads 1
Artificial Intelligence Fuzzy Logic Modeling of Surface Roughness in Plasma Jet Cutting Process of Shipbuilding Aluminium Alloy 5083
In this paper the influence of different process parameters on surface roughness responses in plasma jet cutting process was investigated. Experimentations were conducted on shipbuilding aluminium 5083 sheet thickness 8...
The Modelling of Surface Roughness After the Turning of Inconel 601 by Using Artificial Neural Network
This research includes longitudinal turning of Inconel 601 in a dry environment with PVD coated cutting inserts. Turning was performed for different levels of cutting speeds, feeds, depth of cuts and corner radius. After...
The Technological Factors and Operating Conditions Influence on the Molybdenum Disulfide Coatings Tribological Properties
Molybdenum disulfide is a widely used solid lubricant operates successfully under extreme conditions such as vacuum, high or low temperatures, high loads etc. Magnetron sputtering is one of the most common method of appl...
Statistical Modeling and Optimization of Surface Roughness for PLA and PLA/Wood FDM Fabricated Items
During last decades fused deposition modeling (FDM) has emerged as a widely applied additive manufacturing technology for numerous engineering applications. The present work investigates the effects of two independent va...
Simulation of the Mechanical Behavior of the Degradation L4-L5 Lumbar Spine
Degenerative changes in the lumbar spine significantly reduce the quality of life of people. To fully understand the biomechanics of the affected spine, it is crucial to consider the biomechanical alterations caused by d...