Empirical Modeling Methods of Turning Process: A Review
Journal Title: Journal of Materials and Engineering - Year 2023, Vol 1, Issue 2
Abstract
This paper presents a review of the modeling methods which are widely used for empirical modeling of turning process. The review considered the scientific publications from renowned scientific resource bases from 2018 until the end of 2022. The main focus was to identify the applied empirical methods, considered turning process performances, turning process parameters, material of cutting tool and workpiece, type of turning operation (single or multi pass turning) and a number of performed experimental trials upon which mathematical model was developed. Research in this area provides ready-made information in one place that can be very useful to future researchers who decide to research in this direction, i.e., possibilities for modeling certain turning process performances as well as selection of process parameters and modeling method.
Authors and Affiliations
Jelena Stanojković, Miloš Madić, Dragan Lazarević
Keywords
Related Articles
- EP ID EP727411
- DOI 10.61552/JME.2023.02.004
- Views 57
- Downloads 0
N-Methyl-2-(1-(5-methylthiophen-2-yl)ethylidene) hydrazinecarbothioamide as Corrosion Inhibitor for Mild Steel in HCl Solution: Weight Loss and DFT Investigations
For This study investigated the corrosion inhibition performance of N-methyl-2-(1-(5-methylthiophen-2yl)ethylidene)hydrazinecarbothioamide (MTET) on mild steel in hydrochloric acid (HCl) solution using weight loss and de...
Triboinformatic Modeling of Wear in Total Knee Replacement Implants Using Machine Learning Algorithms
Pin-on-disk (PoD) tests, the most prevalent studies, are being carried out in order to evaluate tribological behaviour of different bearing materials. However, the comparison of results obtained from the PoD tests is ver...
The Technological Factors and Operating Conditions Influence on the Molybdenum Disulfide Coatings Tribological Properties
Molybdenum disulfide is a widely used solid lubricant operates successfully under extreme conditions such as vacuum, high or low temperatures, high loads etc. Magnetron sputtering is one of the most common method of appl...
The Modelling of Surface Roughness After the Turning of Inconel 601 by Using Artificial Neural Network
This research includes longitudinal turning of Inconel 601 in a dry environment with PVD coated cutting inserts. Turning was performed for different levels of cutting speeds, feeds, depth of cuts and corner radius. After...
Effect of Cross-Sectional Profile of Circular Dimples on Hydrodynamic Lubrication Characteristics of Thrust Bearings
The effects of three types of dimples with different internal structures on the fluid lubrication characteristics of thrust bearings were investigated. The load-carrying capacity and the frictional torque were measured....