The Morphology and Conductive Properties of Composite Material SiO2 – C
Journal Title: Фізика і хімія твердого тіла - Year 2015, Vol 16, Issue 4
Abstract
The article explores the structure, morphology and conductive properties of composite material SiO2 – C using XRD, SAXS, low-temperature nitrogen adsorption, and impedance spectroscopy methods. It is set that SiO2 – C composite obtained by thermolytic decomposition of D-lactose, previously chemisorbed on fumed silica nanoparticles surface, has an open porous structure, in which mesopores of 6-12 nm in size are dominate. At weight ratio SiO2/C = 5/1 nanocrystallites of carbon phase in form of lamellar sheets of 0,4 × 0,4 × 5,0 nm3 in size contact with entire silica surface that results in composite material conductivity is 49 Оhm-1•m-1.
Authors and Affiliations
I. F. Myronyuk, V. I. Mandzyuk, V. M. Sachko, Yu. O. Kyluk
Keywords
Related Articles
- EP ID EP293346
- DOI 10.15330/pcss.16.4.700-705
- Views 77
- Downloads 0
Dissipative Structures and Fractal Approach to the Formation of Non-Crystalline States
Found that the formation of fractal dissipative structures in non-crystalline solids associated with the creation of self-consistent fields of soft atomic configurations and thermal behavior of such structure-sensitive c...
Transformations of Titanium (IV) Butoxide on Magnetite Surface in the Presence of Pluronic P-123
The technique of producing magnetically operated nanocomposites Fe3O4/TiO2 with high specific surface area (to 320 m2/g) was developed. A copolymer poly(ethylene glycol)-block-poly(propylene glycol)-block-poly(ethylene g...
Peculiarities in WC and W2C Eutectic Phases Dissolution in Interfacial Zones of Composites
Annotation: The structural and phase composition of dissolution-and-diffusion interfacial zones at the particle-matrix interfaces of the composites reinforced with W–C particles infiltrated by a molten iron-base binder h...
Influence of Laser Radiation on the Optical Properties of Thin Layers Ge1-хSix
In this work are the optical studies (reflectance and transmission spectrum) of solid solutions Ge1-хSix (х = 0.85) before and after laser irradiation in the energy range 46.6 mJ/cm2 to 163.5 mJ/cm2. It is shown that in...
Microstructure and Properties of AlCrCoNiCuFeх (х =0 – 2.0) High-Entropy Alloys
AlCrCoNiCuFeх (x values in molar ratio, x = 0; 0,5; 1,0; 2) high-entropy alloys were prepared using a vacuum arc melting method. The effects of Fe addition on microstructure and mechanical properties were investigated. T...