Peculiarities in WC and W2C Eutectic Phases Dissolution in Interfacial Zones of Composites
Journal Title: Фізика і хімія твердого тіла - Year 2016, Vol 17, Issue 3
Abstract
Annotation: The structural and phase composition of dissolution-and-diffusion interfacial zones at the particle-matrix interfaces of the composites reinforced with W–C particles infiltrated by a molten iron-base binder has been investigated. The peculiarities in the filler’s phases dissolution during infiltration have been explained within the framework of computed model allowing the estimation of an average atom oscillation frequency of the investigated phases.
Authors and Affiliations
O. V. Sukhova, Yu. V. Syrovatkо
Keywords
Related Articles
- EP ID EP247889
- DOI 10.15330/pcss.17.3.363-367
- Views 123
- Downloads 0
Influence of Doping and Two-temperature Annealing on CdTe:Br Defective Subsystem
The influence of impurities and annealing conditions on the electrical properties of single cadmium telluride crystals with bromine doping grown by Bridgman method and annealed in cadmium atmosphere at temperatures T = 8...
Incorporation of Nanoparticles into Inorganic Salt Crystals (review)
This article provides an overview of the literature data on the incorporation of nanoparticles into crystals of inorganic salts, particularly alkali metal halides, potassium dihydrogen phosphate and others. The descripti...
Features of Synthesis of Complex Oxide Systems by Means of SGA-Method
In this paper studies the mechanisms of complex oxide systems formation obtained by the method of sol-gel autocombustion. It was found that at the mixing of precursors hydrolysis reaction occurring, leading to the format...
Peculiarities of Non-Stationary Temperature Distribution of Optical Non-Transparent Anisotropic Thermoelement at Impulse Ray Excitement
The solutions of non-stationary equation of thermoconductivity for the optical non-transparent thermoelement at impulse ray excitement are presented in the paper for two time ranges: when the ray current falls (0<t <t) a...
The Lithium Power Sources Based on Porous Carbon Material
The paper describes the use of porous carbon material (PCM), obtained from plant raw materials as anode of lithium power source (LPS). It is established that the electrochemical parameters of LPS at current density of C/...