THE POLYAMIDE MEMBRANES MODIFIED BY COPPER OXIDE USING PVD TECHNIQUES
Journal Title: Journal of Machine Construction and Maintenance - Year 2018, Vol 110, Issue 3
Abstract
The aim of this research was to examine the influence of process parameters of low-temperature plasma treatment on the permeability, stability, and antibacterial properties of polyamide membranes. As a result of the work, the process conditions were selected for plasma deposition of copper oxide, which enable the high stability of the copper oxide coatings on the filtration materials characterized by efficient permeability and antimicrobial activity. Further work is necessary to examine new generation filtration materials in real process conditions for industrial post-consumer liquids. This can contribute to the implementation of the new generation filtration materials proposed in this work.
Authors and Affiliations
Anna KOWALIK-KLIMCZAK, Ewa STANISŁAWEK, Joanna KACPRZYŃSKA-GOŁACKA, Bernadetta KAŹMIERCZAK, Piotr WIECIŃSKI
Keywords
Related Articles
- EP ID EP614856
- DOI -
- Views 143
- Downloads 0
MULTIFUNCTIONAL INTERPHASES IN ELECTROSTATIC COATING OF ELECTRICALLY NON-CONDUCTIVE MATERIALS
Solvent-based or waterborne coatings commonly used in surface finishing of plastic or composite-based products exhibit very low spray transfer efficiency, typically not exceeding 30–35%. Powder coatings, an attractive 10...
THE EFFECT OF THE AMORPHOUS CONTENT OF LASER CLADDING Ni-Nb-Zr/CaF2 ON MICROSTRUCTURE AND PROPERTIES
Ni-Nb-Zr/CaF2 amorphous coating was prepared on the surface of SA283GRA steel by adopting a high-power laser cladding system. The results show that the Ni-Nb-Zr/CaF2 coating obtained by laser cladding has a good metallur...
PROBLEMS OF EXPLOITATIONS OF MICROWAVE REACTORS FOR NANOPARTICLES SYNTHESIS
The advantages of microwave reactors in chemistry have been exploited in many fields, but the proper reactor design still make a challenge.Areas where microwave technology is applied are drying, chemical decomposition, p...
ASSESSMENT OF ALTERNATIVE SURFACE MODIFICATION TECHNOLOGIES FOR IMPROVED ADHESION OF COATINGS AND ADHESIVES TO AUTOMOTIVE POLYOLEFINS
Thermoplastic olefins (TPO’s) are important materials for the manufacture of exterior and interior automotive components due to their low cost, reduced specific density in comparison with other types of plas...
PREDICTION OF HYDRODYNAMIC STABILITY LOSS IN WATER-LUBRICATED PLAIN BEARINGS BASED ON THE LYAPUNOV EXPONENT
The article proposes a new algorithm for data analysis for diagnostics and the prediction of the loss of hydrodynamic stability in plain bearings associated with the appearance of oil vortexes in the lubrica...