The problem of minimizing the radioactive leakage into the VVER circuit under normal conditions
Journal Title: Праці Одеського політехнічного університету - Year 2017, Vol 2, Issue 52
Abstract
According to the Strategic Energy Technologies plan, two priorities have been accepted by the European Commis-sion: develop and strengthen energy-efficient systems; increase safety in the use of nuclear energy. The aim of the research is working out grounds for improvement of the VVER operation safety-efficiency balance, for that a new approach to minimizing the radioactive leakage into the VVER circuit under normal operating conditions, based on minimizing the damage parameter of fuel claddings, has been proposed. Using the CET-method for calculating the cladding damage parameter, a new method for control of parameters determining the dose of radioactive leakage through microcracks of fuel claddings into the reactor circuit, under normal operating conditions, has been described. The conditions and a need for development of an automated control system minimizing the radioactive leakage into the VVER circuit under normal conditions, by means of optimizing the VVER loading mode and rearrangements of fuel assemblies in the core, have been shown.
Authors and Affiliations
S. N. Pelykh, М. А. Frolov, А. V. Nalyvayko, Huiyu Zhou
Keywords
Related Articles
- EP ID EP319507
- DOI 10.15276/opu.2.52.2017.06
- Views 137
- Downloads 0
Modern technologies in the system of regeneration and purification of boron concentrate
The analysis of the efficiency of the technological chain of a typical installation (device) SVO-6 is performed. Characteristic drawbacks, inherent in combined “evaporation-ion-exchange filtration” systems conditional to...
Determination of economic feasibility of heat supply from NPP for oilfield
The oil production in Ukraine is constantly decreasing. In these conditions it is appropriate to use tertiary methods of intensifying in oil production which increase the mobility of oil. These include a method based on...
The substantiation of the parameters of the rotary-film contactor for extracorporeal processing of large volumes of blood using ozone
Development and improvement of methods of ozone therapy is closely related to the optimization of the technical tools providing solutions to a variety of clinical applications. Aim: The aim of this research is to develop...
Increasing of process energy efficiency of biogas plants production processing
As a result of the decomposition of plant biomass in biogas digesters, a significant amount of such a resource as digestate is obtained. Formally, this is valuable biofertilizer, but in practice, there are many factors c...
Automation of arches calculation
The procedure of automation of calculation of the strained-deformed state of circular arches is considered in the calculation of bending and tensile-compression deformations concentrated and distributed external loads. T...