The Progressive Effect of Sport Drinks on the Color Change and the Surface Properties of Different Types of Resin Composite
Journal Title: International Journal of Health Sciences and Research - Year 2017, Vol 7, Issue 6
Abstract
Objectives: The aim of this study is to evaluate the color changes and surface roughness (Ra) of different types of resin composite after their immersion in different sport drink types for 7days, 1 month, 3 months as well as 6 months. Materials and methods: Sixty disk-shaped specimens (diameter: 10 mm, and thickness: 2 mm) were made from four different resin composites (Filtek Z250, Vertis Flow and Spectrum). Each specimen was cured under mylar strips for 20 sec for both top and bottom surfaces. All of the specimens were stored in distilled water for 24 h at 37˚C. Color measurements of each specimen were performed with Color Eye system. All the measurements were performed at baseline and at 7days, one month, 3 months and 6 months of immersion in the selected sport energy drinks (Code Red, Red Bull and Bison). Another Thirty six disc-shaped specimens with the same dimensions were prepared for surface roughness (Ra) determination using a noncontact 3D-optical-profilometer. Baseline and after immersion in the different sport energy drinks for 6 months were determined. Surface topography (Ra) and color changes (DE values) of the groups were recorded and statistically analyzed. Results: Variations in the composition of different sport drinks media did not affect the color changes of resin composite groups tested. When comparing the effect of the immersion media on the different types of resin composite, DE showed; from 1 to 7 days immersion Spectrum and Vertise Flow showed higher changes in color than Filtek Z250. From 7 days to 1 month Vertise Flow showed the highest changes in color followed by the Spectrum while Filtek Z250 showed the lowest color changes. From 1 to 3 months constant color were maintained for all the rein composite tested groups. From 3 to 6 months of immersion Filtek Z250 and Spectrum showed higher changes in color than Vertise Flow. The effect of time showed that the color changes of all resin composite groups tested are directly proportional to the increase in time. Surface roughness (Ra) showed insignificant difference between the groups except for the Spectrum when immersed in code red the Ra increased. Conclusion: 1. All resin composite tested showed color changes when immersed in sport drinks solutions. 2. The color changes is directly proportional to the time of immersion of resin composite. 3.Vertise Flow showed the least color changes by time followed by the Filtek Z250 while the Spectrum showed the highest color changes. 4. The higher the amount of urethane dimethacrylate in the composition of resin composite the higher is the color changes and the surface roughness of the material.
Authors and Affiliations
Dr. Ihab Moussa
Pregnancy Outcome in Women with Hypothyroidism
Objective: The present study was to know the pregnancy outcome in women with hypothyroidism. Methods: This randomized prospective study was carried out in the department of Obstetrics and Gynecology, Kamla Nehru State H...
Efficacy Laser Dermabrasion Followed by Topical 5- Fluorouracil in the Treatment of Stable Vitiligo
Background: Vitiligo is one among the various dermatological conditions where medical treatment can offer only partial success. A combined approach in the form of skin ablation and topical 5 fluorouracil has given good r...
Household Food Security, Dietary Practices and Nutritional Status of Preschool Children in Bahari Division, Kilifi County, Kenya
Background: Food insecurity is a public health problem of concern since its impact can havE detrimental effects on the life of an individual. Worldwide, 12% of people are unable to meet their dietary needs due to househo...
Management of Urinary Tract Infection with Certain Ayurveda Medicines – A Case Study
Urinary tract infection is the most common infection managed in general medical practice and accounts for 1-3% of consultations. Women are especially prone to UTIs. One woman in five develops UTI (Urinary Tract Infection...
Initial Prosthetic Treatment of Patients with Occlusal Wear: Fabrication of Michigan Splint- A Case Report
Restoring the vertical dimension of occlusion in cases of worn dentitions is an elusive subject. In case of such dilemma, before proceeding with irreversible tooth preparations, the adaptability of the patient to the inc...