The reduction of vibrations in circular sawing machines
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2017, Vol 99, Issue
Abstract
The reduction of vibrations in circular sawing machines. The presented in this paper the main objectives of the research were to explore vibrations signals of the main spindle system, the machine tool body and a circular saw to extract informative features for assessment of the designs of the panel saw Fx3 and its follower Fx550.Even though the main spindle of the new table sliding saw Fx550 has its rotational speeds larger about 20% in comparison to the Fx3, peak values of the vibrational velocities in the measurement points were in the recommended range of the peak velocities values for the machine tools. Moreover, the machine tool Fx550 has been a source of the noise on the idling at the level lower about 5 dB in comparison to the panel saw Fx3.Therefore, if the noise is decreased simultaneously vibrations are at lower level.
Authors and Affiliations
Kazimierz Antoni Orlowski, Przemysław Dudek
Keywords
Related Articles
- EP ID EP349875
- DOI -
- Views 60
- Downloads 0
The degree of polymerisation of cellulose of willows growing on Hel Peninsula
The degree of polymerisation and polydispersity of cellulose are treated as cellulose quality indices and affect strength properties of the raw material. This study examines these indices for one-year old Salix acutifoli...
Utilization of cellulose biomass by anaerobic digestion. Optimization of microbial fuel cell (MFC) parameters.
Utilization of cellulose biomass by anaerobic digestion. Optimization of microbial fuel cell (MFC) paramaters.). Following work describes research concerning surface of electrodes as a limiting factor of power output in...
Artificial UV light influence on the colour of chemically modified and thermo - mechanically processed oak (Quercus robur L.) and locust wood (Robinia pseudoacacia L.)
Artificial UV light influence on the colour of chemically modified and thermo - mechanically processed oak wood (Quercus robur L.) and locust wood (Robinia pseudoacacia L.). The oak and locust wood was treated with ammon...
Doping of urea-formaldehyde resin with quebracho tannin – the effect on bond shear strength and formaldehyde emission
Doping of urea-formaldehyde resin with quebracho tannin – the effect on bond shear strength and formaldehyde emission. A commercial urea-formaldehyde resin was blended with 1%wt and 10%wt of quebracho tannin. The effect...
Influence of impregnation time on the degree of wood-based materials fire protection
The aim of the work was the determination of fire protection degree of wood-based materials (OSB, plywood), impregnated with a model fire retardant depending on the time the saturation. Was used 15% solution of fire reta...