The Simulation and Analysis on Correct Operation of Tire Blowout
Journal Title: International Journal of Engineering Innovations and Research - Year 2018, Vol 7, Issue 2
Abstract
For the driving condition of vehicls’ tire blowout at high speed, it is theoretically studied. Analyzing the kinematic response of the tire blowout vehicle, and exploring the correct operation mode after tire blowout, is helpful to ensure the safety of vehicles and personnel. Based on the Dugoff tire model, a tire blowout model is established. And a 7DOF vehicle model is built in the SIMULINK. Assuming that the driver holds the steering wheel after tire blowout. Simulating the vehicle movement state after the tire blowout, the driver adopts two braking modes: continuous braking and intermittent repeated braking, then comparison and analysis the two modes. The simulation results show that the intermittent repeated braking can maintain the stability of the vehicle better under the precondition that the driver holds the steering after the left front tire blowout in a straight line.
Authors and Affiliations
Xiumin Hou, et al.
Keywords
Related Articles
- EP ID EP496558
- DOI -
- Views 127
- Downloads 0
Investigation of Intake Boost Pressure Effects on Performance and Exhaust Exergy of a Natural Gas Fueled HCCI Combustion Engine
To increase thermal efficiency of Internal Combustion (IC) engines and follow emissions regulations, new combustion strategies should be used. Homogeneous Charged Compression Ignition (HCCI) engine is one of the advanced...
Modeling of SDN-based Network Behavior Based on Network Calculus Theory
A new approach to modeling behavior of SDN-based networks is proposed in the paper. The main feature of the proposed approach is the ability to modeling boundary meanings of quality of service characteristics of Software...
Simulating Vector Control Driver using Maximum Torque Strategy on Current Permanent Magnet Assisted Synchronous Reluctance Motor
Permanent Magnet Assisted Synchronous Reluctance Motor is one of the new motors introduced in transportation industry, which have been introduced as a possible tractions motors in hybrid electric vehicle applications. Ac...
Improved Direct Power Control for Brushless Doubly-Fed Wind Power Generator Under Unbalanced Grid Voltage Conditions
Thepaper presents the complete modeling and control strategy of variable speed wind turbine system (WTS) driven brushless doubly fed induction generators (BDFIG). A back-to-back converter is employed for the power conver...
Dependence of Ultimate Bending Moment of Box Girders on Panel’s Slenderness
The structural behavior of box-girders under pure bending moment is analyzed and discussed on the basis of the results of experiments performed by the author. The box girders are geometrically similar but made of differe...