THE STATISTICAL MODELS FOR INTERPRETING THE RESULTS OF PARCELS AREA VERIFICATION IN INTEGRATED ADMINISTRATION AND CONTROL SYSTEM IACS
Journal Title: Structure and Environment - Year 2018, Vol 0, Issue 1
Abstract
A key element of the system IACS is the verification of the parcel area covered by direct subsidies. Control measurements are made by FOTO method, and in a small part by the direct inspection. Statistical methods are used in estimating the significance of differences. The results of such analysis are correct only when the empirical distributions are consistent with the theoretical ones. The problem of distribution adequacy is presented in the paper on the examples of three objects. The hypotheses about the possibility of using the commonly used distributions, and the appropriateness of the modification of the density curves were verified. By questioning the effectiveness of current methods of analysis, the authors point to the advantages of robust statistics. The cognitive effect of the analysis is to indicate the Laplace distribution as a statistical model of the analyzed differences. Research is concluded by proposal of post-control report that sums up relevant properties of the survey results.
Authors and Affiliations
BOGDAN WOLSKI, CEZARY TOŚ
Keywords
Related Articles
- EP ID EP521576
- DOI 10.30540/sae-2018-005
- Views 69
- Downloads 0
PASSIVE ENERGY REDUCTION TECHNOLOGIES IN ENVIRONMENTAL ENGINEERING
The paper presents a review of passive techniques used in environmental engineering and construction, aimed at reducing energy consumption for heating or cooling purposes. These are: green facades, cooling coatings, ther...
CEILING DAMAGE DUE TO SWELLING OF SLAG AGGREGATE IN TERIVA CONCRETE FILLER BLOCKS
The paper reports an example of damage to a Teriva floor slab system. The bottom section of the concrete filling block and the ceiling plasterwork broke away. No symptoms were observed to indicate excessive deformation a...
THE POSSIBILITY OF THE USE OF SECONDARY RAW MATERIALS FROM ENERGY AND IRON&STEEL INDUSTRIES FOR GLASS-CERAMICS PRODUCTION
An effective way to glass strengthening is controlled crystallization, which results in obtaining the material with very favourable mechanical properties compared to parent glass. Crystallization process is conducted bet...
SELECTED ASPECTS OF APPLICATION OF ALUMINIUM ALLOYS IN BUILDING STRUCTURES
The article describes the basic issues related to the use of aluminium alloys in civil engineering. The classification of aluminium alloys according to PN-EN standards is presented. The advantages and disadvantages of al...
WAYS OF FORMATION OF ARCHITECTURE OF EDUCATION 'S NON-FORMAL INSTITUTIONS IN MODERN CONDITIONS IN UKRAINE
Ways of formation of architecture of education’s non-formal institutions in modern conditions in Ukraine are discussed in the article. The aim of the article is to describe some problems of architectural formation of non...