THE STUDY OF ION-EXCHANGE PROCESSES OF EXTRACTING COPPER AND ZINC IONS BY THE CATION EXCHANGER KU-2-8 AND THE ELECTROCHEMICAL SEPARATION OF REGENERATION SOLUTIONS IN THE CU-ZN SYSTEM
Journal Title: Вчені записки Таврійського національного університету імені В. І. Вернадського. Серія: Технічні науки - Year 2018, Vol 29, Issue 1
Abstract
The processes of sorption and desorption of the mixture of copper and zinc ions in the concentration of 0,02 and 0,05 N in highly acidic cation exchangers KU-2-8 are studied. The efficiency of regeneration of the cation exchanger with 8% and 10% sulfuric acid are investigated. The conditions of electrochemical separation of mixtures of copper and zinc ions depending on the acidity of the solution and the density of the current are determined. The study has shown that it is possible not only to extract these metals on strongly acidic cations from aquatic media with repeated use of resins, but also to restore processed regeneration solutions with the help of electrolysis to obtain pure metals – copper and zinc. Therefore, the solutions are suitable for reusing.
Authors and Affiliations
А. С. Колєгова, Г. Г. Трохименко, М. Д. Гомеля
Keywords
Related Articles
- EP ID EP577150
- DOI -
- Views 87
- Downloads 0
APPLICATION OF THE FINITE ELEMENT METHOD OF THE 3DS MAX MODELS
The analysis of the areas of numerical methods application for modeling deformations of mesh three-dimensional structures, such as the physical experiment “in silico”, calculations in the field of engineering sciences an...
THE CONSTRUCTION OF SUBJECT-ORIENTED INTELLIGENT DECISION SUPPORT SYSTEMS OF A SITUATIONAL TYPE
This article is devoted to the further development of the applied concept of situational management. The methodology is based on multi-agent systems, which constitute the current trend in the field of new information tec...
THE MATHEMATICAL ENGINEERING FOR THE APPLIED EXPERT SYSTEMS
The theoretical aspects of the use of methods of mathematical modeling, optimization and planning of the experiment for the adjustment of technological parameters in production are considered in the paper. The article ai...
THEORETICAL AND EXPERIMENTAL INVESTIGATION OF THE TWO-SIDE SILIFFING PROCESS OF THE BURNS OF DIFFERENT DYNAMIC PARTS
A theoretical and experimental study of the process of bilateral sanding of the ends of parts with different diameters has been carried out. A three-dimensional modular model of instrumental surface and part surface has...
APPLICATION OF THE RULES OF URBAN LOGIC IN THE PROBLEM OF IDENTIFICATION OF THE TECHNICAL STATE OF THE AVIATION ENGINE TV3-117
The well-known approach to building a fuzzy expert system for assessing the technical state of the aviation engine nodes TV3-117 is used in the work. The algorithm of control and diagnostics of the technical condition of...