The Synthesis of MnFe2O4-Activated Carbon Composite for Removal of Methyl Red From Aqueous Solution
Journal Title: Molekul - Year 2018, Vol 13, Issue 2
Abstract
In this study, MnFe2O4-activated carbon composite was synthesized by co-precipitation method and applied to adsorb methyl red dye. MnFe2O4-activated carbon composite was made with the mass ratio of activated carbon and MnFe2O4 of 1:2. The composite characterization by using X-Ray Diffraction, Fourier Transform Infrared Spectroscopy, Scanning Electron Micrograph, and Energy-Dispersive X-Ray Spectroscopy, the surface area using the Brunauer, Emmett and Teller and magnetic properties by using Vibrating Sample Magnetometer. The adsorption parameters include contact time, and adsorbent weight. The spectra of FTIR MnFe2O4-activated carbon composite analysis show the presence of Fe-O and Mn-O which is not present in the spectra of activated carbon. SEM analysis shows that the composite has pores and MnFe2O4 oxides are spread on its surface. The composition of the composite consists of C, O, Fe, and Mn. The composite has a surface area of 143.992 smaller than that of the activated carbon of 217.697 m2/g. However, the composite has magnetic properties with the saturatization magnetization of 17.91 emu/g. The optimum condition of the composite for adsorption of methyl red was obtained at a weight of 0.15 g, and contact time of 100 minutes. The adsorption of the composite was in accordance by pseudo-second-order kinetic and Langmuir isotherms with adsorption capacity of 81.97 mg/g.
Authors and Affiliations
Fahma Riyanti, Poedji Loekitowati Hariani, Widia Purwaningrum, Elfita Elfita, Shella Santika Damarril, Iqlima Amelia
Keywords
Related Articles
- EP ID EP608926
- DOI 10.20884/1.jm.2018.13.2.435
- Views 88
- Downloads 0
SYNTHESIS AND CHARACTERIZATION OF CELLULOSE STEARATE ESTER FROM BACTERIAL CELLULOSE AND STEARIC ACID ENZYMATICALLY USING IMMOBILIZED LIPASE
The aims of this study were to determine the optimum conditions of enzymatic esterification between stearic acid with bacterial cellulose using immobilized lipase and to characterize the obtained ester. The optimum condi...
Development of Urea Biosensor Based on Immobilized Urease in Chitosan Cryogel
The development of biosensors using biological components has an important role in detecting the disease early because it has good selectivity and accuracy. In this study, a biosensor which made is a urea biosensor, base...
Morphology-Controlled Synthesis Of SrTiO3 Nanocube By Capping Agent-Assisted Solvothermal Method
The synthesis of SrTiO3 nanocubes have been carried out by solvothermal process using cetyl trimethyl ammonium bromide (CTAB) as capping agent to control the particles morphology. The condition of the synthesis was obtai...
Quality Improvement of Used Cooking Oil by Using Nanocellulose from Sugarcane Bagasse as Adsorbent
Frying oil can produce substances that are harmful for health. One way that can be used to eliminate these dangerous compounds is by using adsorbent. Recently, many adsorbents from natural fibers have been developed. One...
The Effect of pH and Aging Time on the Synthesis of TiO2 – Chitosan Nanocomposites as Photocatalyst by Sol-Gel Method at Room Temperature
The synthesis of TiO2–chitosan nanocomposite photocatalyst using Titanium(IV)-Isopropoxide (TTIP) as precursors and chitosan as host material has been conducted. The synthesis was carried out using sol-gel method at room...