The Use of 3D Scanning Technology in Measurements of Welding Distortions
Journal Title: Biuletyn Instytutu Spawalnictwa - Year 2019, Vol 63, Issue 1
Abstract
The article describes primary issues related to measurements of welding distortions performed using 3D scanning methods. The study includes a review of available industrial 3D scanning solutions. The research involved the experimental investigation of high-strength steels containing welding distortions as well as the SAW surfacing of steel S960QL steel performed using various welding parameters. The research-related tests included the selection of an appropriate 3D scanning technology. During the tests, steel plates were measured using GOM ATOS III Triple Scan and 3D scans were obtained using Kinect for Windows v1 and v2, DAVID SLS-3. The research results demonstrated that the choice of a metrology-grade 3D scanner used for measurements of weld distortions ensured the obtainment of required accuracy of measurements.
Authors and Affiliations
Jerzy Nowacki, Norbert Sieczkiewicz, Michał Nocoń
Keywords
Related Articles
- EP ID EP558025
- DOI 10.17729/ebis.2019.1/3
- Views 69
- Downloads 0
Evaluation of the Effectiveness of High-Density Couplants in Ultrasonic Tests
The article presents the analysis of the effectiveness of acoustic feedback required in ultrasonic contact tests. The analysis included high-density couplants, the use of which aimed to provide the most effective transfe...
Verification of Properties of Joints Made of Advances High Strength Steels in the Conditions of the Complex Thermal Cycles of the HPAW Process
The article discusses the primary issue related to the verification of properties of joints made in AHSS in relation to conventional structural steels and based on the identification of cooling time t8/5. The solution su...
Electron Beam-Based Rapid Prototyping - State of the Art
Fast prototyping involving the use of an electron beam and a deposited material in the form of a wire is an efficient method enabling the making of elements having complicated shapes and made of expensive technical alloy...
Assessment of Mechanical Properties of Laser Beam Welded Joints Made of Steel Strenx S700MC Subjected to High Impact Load
The article assesses the strength and ductility of laser welded joints made of steel Strenx S700MC. The assessment was based on tests results concerning the material structure, hardness as well as quasi-static and dynami...
The Use of 3D Scanning Technology in Measurements of Welding Distortions
The article describes primary issues related to measurements of welding distortions performed using 3D scanning methods. The study includes a review of available industrial 3D scanning solutions. The research involved th...