The Use of the Biomass as Solid Combustible
Journal Title: RECENT - Year 2014, Vol 15, Issue 41
Abstract
The paper presents a research in the area of the wood thermal properties. The main aim of the paper consists on determination the thermal proprieties of biomass according to the moisture content of the wood that result from the burning process. The results obtained after biomass researching highlight the efficiency of biomass use like solid combustible for thermal installations. An important conclusion of wood combustion consists in that the wood biomass used in thermal furnaces had to need moisture content about 10-12% and this moisture content not to exceed 20%. Higher moisture content gives low calorific power that will bring to an inefficient using of wood like a solid fuel.
Authors and Affiliations
Tatiana GRÎU, Aurel LUNGULEASA
Keywords
Related Articles
- EP ID EP131412
- DOI -
- Views 64
- Downloads 0
Intelligent Design Solutions for Intelligent Buildings
This paper is focused on the various virtual architectures of the intelligent buildings. One of the actual challenges is to educate owners on the benefits of an intelligent building design. This makes the education of bo...
Practical Study of the Influence of Load Flow on the Cylindrical and Polygonal Sieves
Experimental research has established conditions under which one sieve can achieve optimum volumetric ranking efficiency. A direct influence in terms of efficiency of these machines has the material load flow in the siev...
The Analysis of the Technologic Parameters Influence in Obtaining the Alloyed Sintered Steels by Two-Steps Sintering
In the paper there are presented the results of the experimental research for elaborating Mn, Mo, Cr, B and Graphite alloyed steels. There were elaborated mixings with 3% Mn and Fe, 1.5% Mo, 1% Cr and 0.5% B, which have...
FEM Modelling and Characteristics Research of Cylindrical Journal Bearing for Cone Inertial Crusher / KID-300
This article presents finite element modeling and simulation analysis of vertical cylindrical journal bearing for cone inertial crusher (KID-300). The research is done through changing different technical and constructiv...
Studies on the Forces Developed in a Rehabilitation Equipment Slider
The paper presents the experiments performed to determine the forces developed by a drive system of rehabilitation equipment. As actuator is used a pneumatic muscle, which works on a spring principle - increases its diam...