Theoretical Analysis and Technical Seismicity Effect Assessment onto the Production Factory due to Traffic in Prešov City
Journal Title: International Journal of Structural Glass and Advanced Materials Research - Year 2017, Vol 2, Issue 1
Abstract
The technical seismicity effect assessment caused by traffic is the aim of article. The highway structure, as the mine of vibration, includes common layers and also special materials with dumping properties. It is the geomesh reducing the crack creation caused by fatigue, the tension strength increase and excess settlement The stress concentration in the bitumen structure reduces and separates into reinforcement. the machines sensible to vibration will be located in the production factory and it means the vibration level estimation caused by future mine of vibration is needed. The dynamic bedrock diagnostics was needed to provide for prognosis numerical model of dynamic effect ground half-space and dynamic effect future highway in the location of Prešov-Haniska and the dynamic interaction of this mechanism (the ground – pavement base structure). The dynamic diagnostics of bedrock main aim was determination of base dynamic parameters due to wave method coming out from surface wave stress spreading analysis in the real area and frequency characteristics of this bedrock area, frequency progression characteristics. The series of Impulse Seismic Method (ISM) measuring was done for named dynamic parameters determination in this bedrock that was modelled also with determined bedrock dynamic parameters in Visual FEA software, whereby the investigating area was separated into the parts according to the geological profile. The FEM model was created as a circle part plane. Dynamic load was applied as kinematic exciting as point vibration velocity and point vibration acceleration in the middle of the model surface. Measured pavement vibration values induced by the vehicle crossing on highways were the outputs. The distances which the mine vibration cross into and the standard limits that mustn’t be over crossed during the production factory Spinea construction and its operation process are the results.
Authors and Affiliations
Daniel Papán, Katarína Krkošková and Zuzana Papánová
Keywords
Related Articles
- EP ID EP40355
- DOI 10.3844/sgamrsp.2017.24.31
- Views 384
- Downloads 0
Performance of Standard Statistical Distributions for Modeling Glass Fracture
Experimental data on the strength of new annealed float glass tested in an ambient environment was collected. A comparison was made between four standard distributions, the normal, lognormal, Gumbel and Weibull, with res...
Knowledge Acquisition of Existing Buildings by Means of Diagnostic Surveying. Case Studies
The issue of assessing the structural safety of existing buildings involves several problems when a unique and reliable strategy of modelling and analyzing is looked for. This is mainly related to the peculiarity of each...
Cracking of Reinforced Recycled Concrete Slabs
The results of an experimental investigation on cracking of fifteen reinforced recycled concrete slabs are presented in this paper. Five different recycled aggregates replacement percentages have been used for different...
Effect of Novel Thermo-Chemical Treatment on Bending Strength of Laminated Glass
The science of thermal and chemical treatment of glass is well documented. The Laminated Glass (LG) is usually not treated as either treated glass is used during production or lower melting temperature of interlayer does...
https://thescipub.com/pdf/10.3844/sgamrsp.2018.1.14
Masonry has a widespread use in the construction of the buildings even in reinforced concrete or steel frames. Past earthquakes have demonstrated the vulnerability of masonry infills resulted in the human life losses and...