Theoretical and Practical Aspects Regarding Radiated Emission Testing in Semi-Anechoic Chambers
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2017, Vol 41, Issue 41
Abstract
This paper presents some theoretical and practical aspects on measurements of radiated emission from a Portable computer. The used Standards are presented and discussed. The measurements were carried out in a Semi-Anechoic Chamber (SAC) in accordance with EN 55022 (CISPR 22) Standard. The test arrangement was in accordance with IEC 61000-4-3 Standard and the following equipment was included: reception antenna, signal generator and emission antenna. The measurements were made at a distance of 3 meters, according to the generic Standard IEC 61000-6-3. The radiated electromagnetic interference (EMI) was assessed in the frequency domain, for the frequency range of 30 MHz – 1 GHz, in compliance with CISPR 22 Standard. The test was performed to verify if the tested item (EUT) – in our case a Portable computer – is operating according to the radiated emission limits imposed by the product Standard of the class in which the equipment is framed: IEC 61000-6-1. Analyzing the values obtained for Quasi-peak during the test period, we noted that none of them exceeded the maximum allowed. The results were in satisfactory agreement with the limits imposed by CISPR 22 Standard, and have demonstrated that the equipment – in our case a Portable computer – works in optimal parameters, passing the radiated emission test.
Authors and Affiliations
Livia-Andreea Dina, Viorica Voicu, Petre-Marian Nicolae, Ionuţ Daniel Smărăndescu
Keywords
Related Articles
- EP ID EP264090
- DOI -
- Views 129
- Downloads 0
Graphical User Interface to Extrapolate the Ideal Covering Factor of the Polar Step
This paper treats some aspects of the geometrical design of salient synchronous generator, used in railway traction. It focus on the transformation of given experimental data curves into polynomial based regression model...
Testing a Filtering and Regeneration System on a Recuperative Stand
The paper has three main objectives: the presen-tation of a laboratory model of a system for active filtering and regeneration (SISFREG) developed through an applied research collaborative project in the frame of Partner...
About the Analytical Methods Applying for Fault Diagnosis of the Static Converters from the Electric Locomotive
In this paper, the results of the monitoring and diagnosis system based on the analytical methods of the auxiliary ventilation service of the electric locomotive which is supplied from the static converter are pres...
Modeling, Simulation and Practical Realization of the Spiral Inductors Used in Wireless Power Systems
With the increase of the number of devices powered and using wireless systems, the optimal design of such systems is necessary. The present study aims at determining the influence of parameters like distance between indu...
Implementation and Adjustment of CPML for CE-FDTD Algorithm
A complex-envelope finite difference time domain (CE-FDTD) algorithm has been proposed in the literature as one of FDTD formulations that is very general. However, this method, didn’t receive a lot of scientific...