Theoretical study of the building principal of internal and external energy balances structures in diesel engine
Journal Title: Recueil de mécanique - Year 2016, Vol 1, Issue 1
Abstract
Distribution knowledge of the energy introduced into the combustion chamber is of great importance in the theory of internal combustion engines. This work aims to highlight the very complex relationship, often indistinguishable between internal and external energy balances components. The scrutiny of internal balance components has permitted to trace back up to the external balance. This can be easily established on a test bench equipped for the occasion. It will assess the perfection of energy's use, the heat loss and the possibility of their reducing, the energy efficiency of exhaust gas use, the possibility and ways of engine operating parameters improving and finally it will allowing to calculate the cooling and energy recovery systems.
Authors and Affiliations
Djallel ZEBBAR, Salaheddine ZEBBAR, Sidali HORR
Keywords
Related Articles
- EP ID EP302295
- DOI 10.5281/zenodo.1134935
- Views 63
- Downloads 0
Thermal regulation of photovoltaic’s cells with a phase change material
Elevation temperature of photovoltaic’s (PV) cells reduced his efficiency, but the use of phase change material’s (PCM) behind the PV can maintain his temperature close of the ambient. This paper studies the use of PCM o...
Definition and prediction of thermal state of cylinder assembly of an internal combustion engine: a new methodology
This study deal with a new approach for the definition and prediction of the thermal state of internal combustion engine elements. In this paper, it is well elaborated for diesel engine cylinder liner. The scientific inn...
Contribution to the study of the thermal effect – application to a tilting pad thrust bearing
This paper deals with one of the most important phenomena occurring in tilting pad thrust bearings. This is the thermal phenomenon. Indeed, the viscosity of the lubricants is very dependent on film temperature, hence th...
Numerical prediction of imperfections influence on the film cooling effectiveness
Film cooling is one of the most used techniques for cooling turbine blades. This process is influenced by several geometric and aerodynamic parameters. One such parameter is the geometric shape of the injection holes: th...
Thermodynamic study and analysis of thermohydraulic cycle for power generation
This paper is devoted to the study and analysis of the thermohydraulic process used for power generation from low potential heat sinks as thermal-solar and geothermal resources. The machine studied operates according to...