Thermal and Mechanical Properties of Epoxy Hybrid Composites
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
Two different mineral particulates Graphite/Granite filled cross breed composites is readied by scattering into the Epoxy as the centre material utilising tenet of half and half blends (Rohm). Mechanical properties like effect quality and hardness, rigidity and modulus morphological properties are additionally concentrated. Composites are read utilising hand layup strategy as a part of the vicinity of hot pressure shaping procedure. The effect quality and hardness properties of graphite/rock composites were researched concerning the relative weight of graphite and stone. The filler stacking is advanced at notable weight example were explored. It is found from the effect quality test that every one of the composites is expanded bit by bit like the stone % increments. From the unique filling example, the tensile properties were marginally higher for the composites having Graphite as filler and Granite as centre material. Checking electron microscopy (SEM) was utilised to study effect crack surfaces of different composites.
Authors and Affiliations
M. VINOTH KUMAR
Keywords
Related Articles
- EP ID EP280994
- DOI 10.24247/ijmperdfeb2018108
- Views 106
- Downloads 0
A Review on Applications of Multi-Criteria Decision Making (MCDM) For Solar Panel Selection
Solar energy is considered as the most used resources of non-conventional energy compared to Wind and Tidal energy. A photovoltaic (PV) system is used to generate solar energy by photovoltaics. The solar panel is one of...
Thermal and Mechanical Properties of Epoxy Hybrid Composites
Two different mineral particulates Graphite/Granite filled cross breed composites is readied by scattering into the Epoxy as the centre material utilising tenet of half and half blends (Rohm). Mechanical properties like...
Use of Bond Graph Technique for Rotor Dynamic System Modelling and Comparative Analysis of Vibration Frequency using Fast Fourier Transform
This paper presents the bond graph model of a vibrating ,rotating shaft with disc mounted on it. Unbalance mass fitted to the disc cause the disc to vibrate. The bBond Graph technique has been used to model this vibratin...
The Experimental Study on the Machining Conditions of Heat Treated Medium Carbon Steel using Ceramic Cutting Tool
The current study shows the effect of various heat treatments on the cutting force and surface finishing of machining for medium carbon steel (0.522C) with different cutting conditions have been investigated. In this res...
Thermal Analysis for Internal Combustion Cylinder Block
This paper presents a simulation and analysis for the thermal stresses of the internal combustion engine and analyzed its effects on cylinders and engine performance. The main aim of this paper is to make a simulation an...