Thermodynamic preconditions of the titanium compounds formation with interstitial elements (C, N, O, B) depending on temperature and pressure of gaseous medium
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 91, Issue 3
Abstract
Results of the thermodynamic analysis of the probability of formation of chemical compounds in the «Ti-C-N-O-B» system are presented in this paper. The ranking of the formation of chemical reactions as a function of temperature (T = 100...1200°C) and air pressure (P = 1.33∙10-8...1∙105 Pa) is carried out. It is shown, that titanium will interact with oxygen most actively, forming a interstitial solid solution with the subsequent T = 900°C titanium boride. Reduction of air pressure is not likely to reduce the formation of compounds containing formation of oxides; following the probability, nitrides will be formed, then carbides and up to temperature oxygen and nitrogen. Thus, at the temperature T = 800°C, the available compound B2O2 will be decomposed and will not be formed at the pressure below P = 1.33∙103 Pa.
Authors and Affiliations
Vasyl Trush, Alexander Luk’yanenko
Keywords
Related Articles
- EP ID EP438029
- DOI 10.33108/visnyk_tntu2018.03.016
- Views 21
- Downloads 0
The flow of concentrated force through open elastic rod to the contour of the curved hole in infinite plate
The new approach to the problem of the flow to the contour of the curved hole in an infinite isotropic plate of concentrated force, applied to the end of reinforcing open elastic bar of constant rectangle cross section,...
Results of experimental investigations on finding the torque change of the safety clutch action
Screw conveyors have been widely applied for transporting bulk and lump cargo in various productions processes. However, while transporting jamming of screw operating unit is possible by caused the gap between the screw...
The comparative analysis of mathematical models of cyclic signals structure and processes
The article deals with the comprehensive research of the possibilities, perspectives and efficiency of the application of the popular mathematical models of cyclic signals and processes on the basis of mathematical suppo...
Increasing of efficiency of manual arc welding and surfacing of engineering products
The data on the exothermic mixture amount in the electrodes coating influence on their heating and melting are given. Experimental methods found that exothermic reactions in the stage of heating and melting take place at...
Determination of rational structural parameters of devices for polymer recycling
The method of definition of rational structural parameters of gear rolls (step and angle of teeth profile, radius of curvature, the depth of the channel) was developed for such a stress-strain state of a polymeric materi...