Treatment of Ammonia Wastewater by Ultrasound. Part I: The Influence of the Ultrasound Energy on the Ultrasound Bath Temperature
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2015, Vol 38, Issue 4
Abstract
The industrial ammonia water decontamination depending on the sample temperature is monitored by this study. The treatment was conducted by the UP100S ultrasound generator (Hielscher Ultrasound Technology, Germany), operating at 30kHz frequency and acoustic power densities of 90 W/cm2 and 460W/cm2 respectively. The effect of sonication both on the bath temperature and ammonia removal, based on treatment time, is presented in this paper. Experiments were carried out according to different parameters, so as the sample temperature variation by ultrasonic treatment to be determined. Studied parameters were: the operating mode variation (continuous or intermittent), the additional aeration and the application of a cooling water serpentine. Based on the results, the ammonia removal efficiency is improved by the heating produced by the ultrasonic energy.
Authors and Affiliations
Nicoleta MATEI (CIOBOTARU), Dan SCARPETE
Keywords
Related Articles
- EP ID EP581122
- DOI -
- Views 97
- Downloads 0
Researches Regarding the Rolling of the Sinterized Metallic Powders Strips
This paper work is distinguishing the size modification of those two material layers gotten by the bimetallic strip rolling, joined by the sintering. The iron powders sediment was achieved on the steel strip backing. Aft...
Method and Procedure for Checking the Accuracy of the Scan-Indexing System of the NDTUT Equipment for Immersion Technique
This paper deals with the proposal of a method and procedure to verify the accuracy of the scanning-indexing system of the NDT-UT facility for immersion technique, using comparison with a plate of aluminum alloy plate, p...
Redesigning a Jaw Crusher Using Value Analysis, Part II
The paper presents a complete study of VALUE ANALYSIS applied concretely to a selected piece of equipment. The phases and ITERATIVE operation of the Value Analysis method are presented. Value Analysis combines both ENGIN...
Finite Element Analysis of Equal Channel Angular Pressing of Al-Mg 5083 Alloy
Bulk nanostructured materials represent the application of nanotechnology in the engineering material area. Severe Plastic Deformation (SPD) and in particular Equal Channel Angular Pressing (ECAP) are efficient and low c...
Conductive-Atomic Force Microscopy Investigation of the Electrical Properties of Low Temperature Deposed ZnO Transparent Thin Films
The paper presents the investigation by conductive-atomic force microscopy (C-AFM) of the variation of the local conductivity and topography of the transparent ZnO thin films deposed onto soda lima glass substrates by sp...