TRIBOLOGICAL PROPERTIES OF PLASMA SPRAYED Al2O3-13TiO2 NANOSTRUCTURED COATINGS
Journal Title: Tribologia - Year 2017, Vol 272, Issue 2
Abstract
Ceramic materials are widely used in various industrial applications on components exposed to high temperature, wear, and corrosive conditions. Nowadays, nanostructured materials are of particular scientific interest because of their physical and mechanical properties, which are superior to those of conventional materials. Plasma spraying is one of the surface engineering techniques for depositing of the coatings with wide variety of properties necessary for industrial use. The work is concerned with a study of the microstructure and tribological properties of plasma sprayed coatings with nanostructured and conventional Al2O3-13TiO2 powders. The coatings were sprayed by means of a Plancer PN-120 plasma system. A T-01 ball on disc tribological tester was used to study their coefficient of friction on the basis of the friction force obtained in the course of continuous measurement at a set load. Results of investigations were compared with properties of the coatings sprayed with standard Al2O3-13TiO2. The nanostructured Al2O3-13TiO2 coating showed the lower coefficient of friction in comparison to the coatings sprayed from the conventional powder.<br/><br/>
Authors and Affiliations
Wojciech ŻÓRAWSKI, Anna GÓRAL, Medard MAKRENEK, Sławomir ZIMOWSKI
Keywords
Related Articles
- EP ID EP240863
- DOI 10.5604/01.3001.0010.6342
- Views 69
- Downloads 0
INVESTIGATION OF CHANGES OF FERROMAGNETIC FLUIDS VISCOSITY ACTIVATED BY STEADY MAGNETIC FIELDS
This paper presents the results of viscosity measurements for selected ferromagnetic fluids subjected to a DC magnetic field at various values of magnetic flux density. The research takes into consideration the dependenc...
THE ANALYSIS OF TRIBOLOGICAL WEAR OF POLYTHENE UHMW PE APPLIED IN BIOTRIBOLOGICAL SYSTEMS
This analysis concerns the interaction of a Co-Cr-Mo alloy head with and without a TiN coating and an ultra-high molecular weight polyethylene (UHMW PE) acetabular cup. The TiN coatings were deposited on the Co-Cr-Mo all...
INVESTIGATION OF BASE OILS INFLUENCE ON THE DURABILITY OF ELEMENTS WITH THIN, LOW-FRICTION COATINGS
Paper presents the influence of various oil bases (mineral, synthetic, and vegetable) on rolling contact fatigue life of highly-loaded friction joints consists of elements with low-friction coatings. The tests were perfo...
Ocena możliwości ograniczenia liczby powtórzeń w badaniach trwałości zmęczeniowej
PROPERTIES OF ELECTRODEPOSITED Ni-Mo COATINGS
Mechanical and tribological properties of electrodeposited Ni-Mo coating were studied. Coatings of 30 μm thickness were deposited under different cathodic current densities 0.5–5 A/dm2 on steel disc substrates. Microhard...