Type influence by fighting of an aircraft design of "kachka" schedule on the distribution of aerodynamic work on the wing
Journal Title: Механіка гіроскопічних систем - Year 2018, Vol 0, Issue 35
Abstract
The purpose of the work is to determine the stress-strain state of the centrifugal turbomachine wheel , in which, when we made calculating in one case, the wheel was considered as constructively orthotropic disk, in the othercase we didn’t took into account the stiffness of the blades, which were considered as the joining mass.Calculations of elements of power equipment were also examined in works [1-3]. The calculation of working wheel as a constructively orthotropic disk was investigated in the works [4 , 5]. The problem is reduced to the solution of the boundary integral equation in relationto the intensity of radial effort in these works
Authors and Affiliations
S. I. Trubachev, O. M. Alekseychuk
Keywords
Related Articles
- EP ID EP508476
- DOI -
- Views 87
- Downloads 0
Methods of calculating the aircraft wing characteristics with influence aeroelasticity
Aeroelasticity is important in many areas of engineering, especially in aviation, where the resulting large size and velocity of the aircraft aeroelasticity is the most significant (negative) factor taken into account wh...
Робастна система керування безпілотного літального апарату
<p><span>У даній статті був розроблений регулят</span><span>ор для безпілотного літального апарату (БПЛА). БПЛА рухається по аеробалістичній траекторії. Як наслідок, параметри БПЛА змінюються досить сильно, що у свою че...
LASER FORMING OF STRUCTURES OF HARDENED ALLOYS OF ALUMINUM
This paper analyzes methods of obtaining thin-walled sheet structures from the pre-heat-treatable aluminum alloys. These drawbacks technology Drobotenko of shaping, which is currently widely used in aircraft industry. It...
Mathematical model of navigation accelerometer instrumental vibration error and its identification at accelerometer dynamic tests
During the flight, in addition to an aircraft accelerating the accelerometer is influenced by vibration. This leads to additional static measurement errors of accelerometer i.e. vibration error. This significantly reduce...
МЕТОДЫ АВТОМАТИЗИРОВАННОГО СИНТЕЗА КОНЕЧНО–ЭЛЕМЕНТНЫХ МОДЕЛЕЙ СТЫКОВЫХ ЭЛЕМЕНТОВ В ПЛАНЕРЕ САМОЛЕТА
The methods of the synthesis of structures of finite element models of power elements, which join the central section of the wing with the central section of fuselage of high wing scheme aircraft, are described. The feat...