Unconventional methods of reclamation of used moulding sands
Journal Title: Archiwum Odlewnictwa - Year 2010, Vol 10, Issue 3
Abstract
Analysis of the literature provides information on a constant search for new ways of regenerating of moulding sand deprived disadvantages of existing solutions, especially in the case of low efficiency of regeneration of a mixture of used masses of certain technologies, and high energy intensity of the high temperature heat recovery. In the advanced stage of the research are both attempts to apply a very high temperature (about 2200oC) for short-term impact on the surface of regenerated moulding sand, as well as support of thermal regeneration of oxygen addition in order to increase the temperature and direct combustion of organic components. At the second end of the scale are attempts to apply the extremely low temperatures to changes in physical properties of used binding material to reduce the work of crushing and recycling of other waste (eg. bentonite). The article presents the results of author’s own investigation of the regeneration process of mechanical and thermal carried out with the new, unconventional treatments which improve the reclaimability of used moulding sands.
Authors and Affiliations
R. Dańko
Keywords
Related Articles
- EP ID EP72114
- DOI -
- Views 102
- Downloads 0
Effect of thickness of refractory coating on the Lost Foam Process
The analysis of the influence of the thickness of refractory coating on the production process of casts in the Lost Foam process was introduced in the work. It was conducted in the peculiarity the analysis simulating inv...
Heat transfer analysis during cooling of die with use of water mist
The paper presents the results of the heat transfer area during the cooling process of steel test die with water mist which consist the flow of air in the range 150÷350 l/min and 0.050.24 l/min of water. Temperature cha...
Ultrasonic methods for the tests of quality of casts from the alloys of aluminum
In this work we present the results of the check test of the properties of casts, made by the method of smelted models in the precise foun-dry THE ARMATURA in Lodz. Casts were made according to the new technological solu...
Usage of ATND method to determination of mechanical properties of AlMg10 alloy with complex additive of SbNiCr
Aluminum alloys with magnesium are commonly used in foundry industry due to lower density and higher corrosion resistance, comparing with silumins. Complicated shapes of produced alloys, differences in wall thickness and...
Nitrogen hardening of creep-resistant G-NiCr28W alloy
In the group of creep-resistant materials, most important are heat-resistant nickel-based alloys. The G-NiCr28W alloy subject to detailed examinations was observed to have two different austenite-like phases. In the inte...