Usage of Connor Inlets to Eliminate Shrinkage
Journal Title: Archiwum Odlewnictwa - Year 2012, Vol 12, Issue 3
Abstract
The demand for castings of high quality and sound work is nowadays very high. The production of sound castings without foundry errors is the big issue in modern foundries. Foundry simulation software can do a lot to help improve the disposition of castings, gating system and feeder system, and assure good filling and solidification conditions, and also produce sound casting without the need of the old method of "try and error". One can easily change a lot of parameters for filling and solidification, and create the best proposal for production. Connor inlets have two functions. One is that it serves as an ingate, through which molten metal passes and comes into the mould cavity. The second function is that it serves as a feeder and substitutes the metal contracted during solidification and cooling of the castings. It can also save quite a lot of metal in comparison to classic feeders.
Authors and Affiliations
D. Fecko, I. Vasková, L. Eperješi, M. Závodný
Keywords
Related Articles
- EP ID EP72685
- DOI 10.2478/v10266-012-0076-0
- Views 99
- Downloads 0
Influence of a matrix on properties of mottled cast iron applied for mill rolls
Mill rolls are ones of the most expensive tools applied in plastic working processes and have to satisfy several criteria, which allow them to be used. Cast iron mill rolls, due to their fracture toughness and tribologic...
The effect of recasting on corrosion of DUCINOX prosthetic alloy
The effect of recasting, up to two times, Ni-Cr (DUCINOX) prosthetic alloy on its corrosion properties was carried out. The corrosion measurements were done in deoxygenated Fusayama Meyer artificial saliva solution at te...
Strength properties of moulding sands with chosen biopolymer binders
The article presents the results of primary researches of the IV generation moulding sands, in which as the binders are used different biodegradable materials. The bending and the tensile strength of the moulding sands w...
The analysis of the possibility of the application of the casting waxes in the process RP
The article presents analysis of possibility of application of casting waxes in process of rapid prototyping of casting models in silicone the matrices. The researches were made on casting waxes applied to the manufactur...
Optimising the composition of natural moulding sands including thermal aspects
The paper discusses the problem of the choice of the moulding sand mixture composition in terms of the sand behaviour in contact with molten metal. Studies of high-temperature phenomena make assessment of the sand compos...