Utilisation of Electrochemical Methods for Characterization of same Corrosion Inhibitors for Steel and Copper
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2009, Vol 32, Issue 1
Abstract
The effect of chromate and molybdate on the corrosion inhibition of copper and steel has been investigated in two eutectics solution at room temperature. We used stationary electrochemical methods and optical microscopy for the characterization of these materials. For steel, the molybdate inhibitor appears less efficient than the chromate one; for copper the polarization curves present an anodic passivation domain only in the chromate inhibited medium. The possibilities of galvanic coupling between them were simulated. This simulation has shown that, between copper and steel, the risk is more important in chromate medium than in molybdate one.
Authors and Affiliations
Florina CONSTANTIN, Marioara ABRUDEANU, Jean-Pierre MILLET
Keywords
Related Articles
- EP ID EP658549
- DOI -
- Views 55
- Downloads 0
Optimization Techniques for the Neutralization of the Polluted Waters from Metal Plating
The problems related to the protection of the environment are regarded especially as a result of the local pollution by the industry and agriculture or by the overcrowded areas, which have led to the disturbance of some...
Calibration and Reference Blocks Used in Nondestructive Ultrasound Examination, According to New European Union Requirements
Pursuant international standards such of the European ones, the nondestructive examinations have to be worked out by the most possible accuracy and repeatability, that allow the difference making between the admitted ind...
Anodization Treatment of Ti6Al4V in Electrolytes Containing HF
The Ti6Al4V alloy is already well-known likely material for implant applications. As well as pure titanium, Ti6Al4V alloy possess the ability to form spontaneously a thin passive oxide layer on the surface. This oxide la...
Influence of Rib Thickness on the Solidification of Cast Parts
The ribs applied to the walls of cast parts are designed for enhancing both stiffness and aesthetics. The presence of ribs modifies the conditions of heat transmission and implicitly the solidification of the alloy in th...
Obtaining and Tensile Strength Study for Non-Precious Alloys Based Cobalt
This paper presents aspects of obtaining non-precious dental alloys of Co-Cr-Mo alloys system and experimental tests to determine tensile strength, carried on standard flat specimens.