Obtaining and Tensile Strength Study for Non-Precious Alloys Based Cobalt
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2014, Vol 37, Issue 2
Abstract
This paper presents aspects of obtaining non-precious dental alloys of Co-Cr-Mo alloys system and experimental tests to determine tensile strength, carried on standard flat specimens.
Authors and Affiliations
Mirabela-Georgiana MINCIUNĂ, Petrică VIZUREANU, Dragoş-Cristian ACHIŢEI, Viorel GOANȚĂ, Ștefan TOMA, Mădălina Simona BĂLȚATU
Keywords
Related Articles
- EP ID EP589258
- DOI -
- Views 102
- Downloads 0
Occupational Risk Management in Industry
Occupational risk management is part of the occupational health and safety at workplace. Occupational risk management has a specific component relating to the assessment of the risk and a common component of all types of...
Studies About Electrochemical Plating with Zinc-Nickel Alloys
The electrochemical deposition of zinc and combinations with elements of the 8th group of the Periodic System (nickel, cobalt, iron) have good properties for anticorrosive protection, compare with pure zinc. For steel pi...
Characterization of Iron and Low Alloy Steel Powders Obtained by Water Atomization
Three types of iron and low ally steel powders were investigated to determinate their physical properties and surface morphology by SEM analysis. The powders were obtained by water atomization. The first type of powder i...
Morphological Aspects of Thermosetting Polymers/Zn Composite Coatings
The present work has the purpose of studying the morphological aspects of composite coatings having zinc matrix and thermosetting polymers (PF resin type NOVOLAC - RESITAL 6358/1 and epoxy resin type DINOX 110L) as dispe...
Material Balance in a Blast Furnace, when Replacing Coke with Coal Dust
The paper presents the technology for the preparation and burning of coal dust in the blast furnace, as well as the material balance, - without and with the in - of coal dust. On the basis of the comparative analysis, me...