Volume Creep Testing Machine
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2018, Vol 8, Issue 1
Abstract
Volume creep testing machine has been designed to test cylindrical rock salt specimen exposed by petroleum pressure in different pressures and temperatures. The volume creep testing machine comprises: two cells each of which includes some parts like main cell, stabilizer system, insulator layer, heater, support layer, check valve and rubber sleeve. The main cells have the responsibility of retaining petroleum pressure and temperature and applying them to the specimen. A tank is there to store the fluid and transmit it with pressure into the cells through pipes. The tank consists of a hydraulic jack and six check valves as petroleum inlets and outlets. Ultrasonic testing systems are used for measuring the thickness and strain of rock salt frequently. Each ultrasonic testing system comprises two dual element transducers and a memory to store data. A thermometer and one pressure gauge are installed inside of the inner cell
Authors and Affiliations
ABBAS AGHAJANIKALKHOURAN
Keywords
Related Articles
- EP ID EP280226
- DOI 10.24247/ijmperdfeb2018072
- Views 77
- Downloads 0
Nozzle Contour Design for Space Propulsion Module
The Earth based Trojan asteroid, later named as 2010TK7, was discovered by the WISE (Wide field Infrared Survey Explorer) space telescope in the year 2010. This paper highlights the design of the propulsion system module...
Eliminating Wrong Spot Welding by Robots in Production Line
The main objective of our project is to reduce the false seam joints. There are many important issues, such as waiting for a lost robot, checking individual parts, unnecessary manual nutrition and increasing the cycle ti...
The Experimental Study on the Machining Conditions of Heat Treated Medium Carbon Steel using Ceramic Cutting Tool
The current study shows the effect of various heat treatments on the cutting force and surface finishing of machining for medium carbon steel (0.522C) with different cutting conditions have been investigated. In this res...
Experimental Investigation on Silicon Carbide Reinforced Duralumin based MMC Produced by Cold Compacting
In the present investigation, an attempt is made to fabricate the Duralumin(DA) based Silicon Carbide (SiCp-6 and 12% wt.) reinforced composite by cold compacting the ball milled powders. The mechanically mixed powders t...
Microstructural and Corrosion Studies by Immersion in 3.5wt % NaCl Environment on Mg-6Al-1Zn-XCa Alloy with Ca Addition and Aged at different Temperatures
The effect of aging at different temperatures of 180ºC, 200ºC, 220ºC, and 240º C with various level of calcium (X=0.5, 1, 1.5, 2%) addition on Mg-6Al-1Zn-XCa alloy were investigated in 3.5Wt.% NaCl solution. The specimen...