Wastewater Treatment Case Study - SEAU Braila
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2018, Vol 41, Issue 2
Abstract
The paper analyses the influent and effluent parameters, as well as the efficiency of the purification process. CBO5 is found to be within the legal limits in terms of the amount of effluent suspensions of max 6.0 mg/L O2. The efficiency of their removal from the influent was at least 94.8%. CCO is observed within the legal limits of the amount of effluent suspensions of max 20.2 mg/L O2. The efficiency of their removal from the influent was at least 93.0%. Suspended matter shows that the effluent sludge was within the legal limits of max 10.9 mg/L, and the efficiency of their removal from the influent was at least 91.6%. Total nitrogen (Ntotal) and total phosphorus (Ptotal) are exceedances of the limits for sensitive areas subject to eutrophication. A downstream denitrification step is proposed downstream of the aerobic stage to eliminate total nitrogen, and a phase of chemical treatment or alternation of aerobic and anoxic steps is proposed for the removal of total phosphorus.
Authors and Affiliations
Lucica BALINT
Keywords
Related Articles
- EP ID EP597746
- DOI -
- Views 59
- Downloads 0
Influence of Alloying Elements on Corrosion Resistance of Some Iron - Based Sintered P/M Alloys
In this paper is described the influence of alloying elements on corrosion behavior of sintered iron parts. The compacts were sintered at 1,150 °C and the sintering time was 60 minutes. After microstructural studies, the...
Intercritical Thermomechanical Treatments of the Microalloyed Steel Products for Welded Structures
This paper shows the laboratory experiments made on several grade steels by applying some intercritical thermomechanical treatments; Two variants were used: “down-up” thermomechanical treatment with heating and rolling i...
Researches Concerning Phase Transition of Zirconium Titanate Prepared by Electrolytic Method
Powder zirconium titanate ceramics obtained by an electrolytic method has been investigated. Continuous phase transition were found to occur in powder zirconium titanate above and below a major discontinuity at 1120 oC±1...
Residual Stress and Tribology Behaviour of TiCx Coating Deposited by NPCVD Method
In this paper, thin TiCx films were coated by chemical vapour deposition method, and various duty cycles were carried out in order to observe the influence of this parameter on residual stress and tribology behaviours. T...
The Action of the Ultrasonic Vibrations over the Diffusion Process in Gases and Liquids
Among the new method of studying the properties of the substance and the influence over the most various physical and chemical processes, used in different industrial domains, the main place is occupied by the usage of s...