Water Quality of Surface Runoff in Loop Two Catchment Area in UKM
Journal Title: Jurnal Kejuruteraan - Year 2016, Vol 28, Issue 1
Abstract
For a country that is developing, there is a need to control and maintain the quality of raw water, with adequate quantities to ensure continuous supply of clean water. In Malaysia, urban development activities especially constructions, is believed to be one of the activities that contributes to the deterioration of the quality of surface runoff. The main objectives of this project are to investigate water quality of surface water runoff at UKM’s loop two catchment areas and to observe the effect of slope failure, erosion, and construction activities on surface water quality in UKM Bangi campus. Besides that, the development of hydraulic models using HEC-RAS software is also the objective of this research. This research is conducted through field study and laboratory works. The main findings confirmed that water quality and total surface runoff in the catchment is directly affected by slope failure, erosion, and construction activities. Results from HEC-RAS modeling revealed that the drains surrounding the lake are not overflowing or flooding.
Authors and Affiliations
Norshahkilla Izzatul Zaiedy, Othman A. Karim, Nurul Afina Abd Mutalib
Keywords
Related Articles
- EP ID EP324002
- DOI 10.17576/jkukm-2016-28-07
- Views 139
- Downloads 0
Water Quality of Surface Runoff in Loop Two Catchment Area in UKM
For a country that is developing, there is a need to control and maintain the quality of raw water, with adequate quantities to ensure continuous supply of clean water. In Malaysia, urban development activities especiall...
Analysis of Damper Effect on Cable-Stayed Bridge Using Finite Element Simulation
Cable-stayed bridges generally having common defects such as excessive vibration due to wind action, corrosion and fatigue occurred at the cables supporting member. This study presents two different approaches for the de...
Effect of Chemical Treatments and Coupling Agents on the Properties of Unidirectional Jute Fiber Reinforced Polypropylene Composite
Due to different chemical nature of jute and polypropylene, their blended composite materials often show failures behavior when applied in load bearing purposes. The aim of the research is to improve the properties of un...
Optimization of Internal Mixing Parameter on the Electrical Conductivity of Multiwall Carbon Nanotubes/Synthetic Graphite/Epoxy Nanocomposites for Conductive Polymer Composites Using Taguchi Method
Conductive polymer composites (CPCs) can be widely uses as electronic devices, artificial muscles, solar energy conversion, and sensors. Nevertheless, CPCs has a low electrical conductivity. Therefore this study focused...
Measurement of Gas Holdup and Mass Transfer in a Bubble Column by Using Electrical Resistance Tomography (ERT)
Gas dispersion performance and gas hold-up in a bubble column was investigated by using electrical resistance tomography (ERT). Experiments were carried out to visualize flow pattern and gas hold-up at different gas velo...