Ways of implementation of vibrations suppression methods at parts machining with CNC machine tools

Abstract

The further magnification of efficiency of parts machining with little inflexibility demands the machining application of new technological solutions. The concept of suppression of the regenerative oscillations at the expense of modulation of cutting speed becomes one of such directions. Aim: The aim of the research is the development of the control system for milling machine tool, allowing to realize modulation of cutting speed under the periodic pulsing law with the given modulating depth and frequency. Materials and Methods: Development of the control system is made for the machine tool Micron OMM64SC with control unit of SINUMERIK 802D. Results: The theoretical fundamentals of given concept of suppression of the regenerative oscillations are developed; research works have confirmed the efficiency of its applications. Various alternatives of implementation of an additional correcting link of a control system by a cutting machine with function of modulation of cutting speed are observed in the paper. Advantages and deficiencies of each of alternatives are specified. The original block diagram of the system is resulted and the exposition of its practical implementation on horizontal milling machine OMM64 with CNC system of SINUMERIK 802D is resulted.

Authors and Affiliations

V. М. Tonconogy, S. А. Zelinskiy, V. A. Vodichev, V. V. Natalchishin, A. Zh. Tkach

Keywords

Related Articles

Thermal hydraulic analysis of the regimes with unmanageable control rods movement and ejection for the reactor strength estimation

The article presents results of research (thermal-hydraulic analysis) of initiating events (regulatory regimes), associated with the uncontrolled movement and ejection of control rods that had previously not been conside...

Automation of arches calculation

The procedure of automation of calculation of the strained-deformed state of circular arches is considered in the calculation of bending and tensile-compression deformations concentrated and distributed external loads. T...

Improving the reliability of pulsed laser rangefinder and infrared devices of homing and surveillance by final electron beam processing of their optical components

To prevent the negative impact of external thermal actions on reliability of devices for measurement and thermal testing of objects of various physical nature the practical importance has electron beam processing of surf...

The algorithms for automated calculation of the furnace charge in smelting and refining metal

The production of the initial liquid metal with minimal departures from the regulated chemical composition is one of the main conditions for the production of high-quality castings with predetermined physical, mechanical...

Plasma-chemical preparation of nanoscale cobalt oxide

As of today, sols and nanodispersed systems of transition metal oxides are increasingly spreading. Due to a number of properties, undoubted interest for the development of technologies in various industries is represente...

Download PDF file
  • EP ID EP316405
  • DOI 10.15276/opu.1.51.2017.07
  • Views 160
  • Downloads 0

How To Cite

V. М. Tonconogy, S. А. Zelinskiy, V. A. Vodichev, V. V. Natalchishin, A. Zh. Tkach (2017). Ways of implementation of vibrations suppression methods at parts machining with CNC machine tools. Праці Одеського політехнічного університету, 1(51), 34-39. https://europub.co.uk/articles/-A-316405