Wear Behavior of AL 7075/FA/SiC Hybrid Composites
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 2
Abstract
This research examined the influence of sic and fly ash on the wear behavior of Aluminum 7075/5 and weight percentage of hybrid complex. Aluminum alloy 7075 strengthened with sic-fly ash were examined. The effectiveness of integration of sic in the composite for obtaining wear reduction is investigated in this study. Using under stir casting route, the composites were made-up. Ceramic elements were incorporated into aluminum alloy matrix along with solid lubricating materials to improve the friction coefficient and to achieve the decrease in both wear resistance. With 5 and 10 weight percentage of sic /fly ash particles, the Aluminum 7075/fly ash/sic hybrid compound was made. The wear properties of the hybrid composites including sic expressed the superior properties of wear-resistance.
Authors and Affiliations
Ramakanth U. S, Putti. Srinivasa Rao
Keywords
Related Articles
- EP ID EP582052
- DOI 10.24247/ijmperdapr201932
- Views 60
- Downloads 0
Parametric Study in Surface Finishing of Inconel 718 Surface with Magnetic Abrasive Finishing Process
Inconel 718 is a nickel based alloy, used in high pressure and temperature applications, due to its high strength and thermal resistance properties. Machining of Inconel 718 is very difficult due to its toughness. Surfac...
PHYSICAL SIMULATION FOR HOT ROLLING POLICY OF ELECTRICAL SI–STEELS
The present work is dealing with three Si-steel alloys. Representative samples were taken and machined from the as- cast ingots to suite the thermo mechanical simulator. The physical simulation process consists of heatin...
CFD Analysis of Cryogenic Helical Coiled Shell and Tube Heat Exchanger
Present study deals with the CFD (computational fluid dynamics) analysis of helical coil - shell and tube counter flow heat exchanger, which is used in cryogenic applications owing its compact construction and larger hea...
Mechanical and Thermal Investigations of Aluminium Al7075 Zirconium Oxide and Graphite Composite Material
In the world, existing materials are not sufficient to overcome the needs and to fulfil those needs, composite materials exist. The properties of composite materials are enhanced to overcome the needs. In this article, A...
Fast Timing in Detectors of Ionizing Emission to Identifying Fabrics as a Possibility of Non-linear Optical Phenomen
50–70 ps restrict the time determination of the finders right now being used because of the unconstrained procedures required in the improvement of the reaction signal, which frames after the unwinding of bearers created...