WEAR TESTING OF a-Al2O3 OXIDE CERAMIC IN A DIVERSE ABRASIVE SOIL MASS
Journal Title: Tribologia - Year 2014, Vol 253, Issue 1
Abstract
This paper presents a comparative study of the intensity of α-Al2O3 oxide ceramic sand 38GSA martensitic steel wear in three types of abrasive soil masses, i.e. loose sand, sandy clay and heavy clay. The tests were carried out under laboratory conditions on a “spinning bowl” wear machine. Based on the obtained results, the intensity of ceramic material wear was many times lower than 38GSA steel wear. It was found that the granulometric composition had an important effect on the intensity of α-Al2O3 ceramics wear. The lowest α-Al2O3 oxide ceramics wear was obtained during friction in sandy clay, and it was 1.5 times lower than in heavy clay and 1.9 times lower than in loose sand. Differences in the types of tribological wear, depending on the granulometric abrasive mass composition, are described.
Authors and Affiliations
Jerzy NAPIÓRKOWSKI, Krzysztof LIGIER
Keywords
Related Articles
- EP ID EP263772
- DOI -
- Views 34
- Downloads 0
THEORETICAL AND EXPERIMENTAL INVESTIGATION OF THE TEMPERATURE PROFILE IN HYDRODYNAMIC THRUST BEARING
In this paper, some example results of calculations focused on the assessment of pivoted pad thrust bearing operation are presented. Results were obtained with the use of a calculation technique called FSI (Fluid Structu...
Wpływ temperatury węzła tarcia na charakterystyki tribologiczne smaru plastycznego
INCREASING THE SERVICEABILITY OF FRICTION PAIRS BY APPLYING A:C:H AND A:C:H:W DLC COATINGS
The paper discusses the results of structural and tribological tests conducted for a:C:H and a:C:H:W DLC coatings deposited on Co- Cr-Mo specimens using the PACVD process. The structure and morphology of the Co-Cr-Mo sub...
Wpływ procesów technologicznych na zużycie frettingowe w połączeniu wciskowym
W artykule przedstawiono wyniki badań wpływu wybranych procesów obróbki wykańczającej warstwy powierzchniowej (rolowanie, azotowanie, hartowanie powierzchniowe i molibdenowanie) na rozwój zużycia frettingowego w połączen...
THE WORK OF ADHESION AND FREE SURFACE ENERGY COMPONENT UTILIZATION IN TRIBOLOGICAL ANALYSIS OF SURFACE LAYER CONDITIONS
Tribological aspects of the utilisation of surface layer energy conditions related to the description of tribological system properties are presented in this article. As an example, an estimation of the energy conditions...