Zastosowanie programów obliczeniowych typu CAD w projektowaniu stopy protezowej

Journal Title: Rehabilitacja w Praktyce - Year 2018, Vol 1, Issue 3

Abstract

In the case of foot amputation it is necessary to provide a patient with a prosthesis in order to restore proper gait pattern and enable them to return to physical activity and self-care activities. The aim of the paper is to present our own concept of a prosthetic foot and the possibilities of using CAD programmes for its design. Materials of high resistance to deformations and high fatigue strength must be used for the manufacture of a prosthetic foot. In order to assess the above parameters, a 3D model of a prosthetic foot and MES simulations in the Invertor environment were used. It is impossible to design a prosthetic foot excluding the foot biomechanics and human gait characteristics, therefore the gait analysis with the use of the BTS Smart system with passive light markers reflecting the red light was applied.

Authors and Affiliations

inż. Adam Gramala, dr n. med. Adam Maksymilian Pogorzała, dr Tomasz Walczak, dr hab. inż. Paweł Drapikowski

Keywords

Related Articles

Postępowanie terapeutyczne w śpiączce

Coma changes the life of a patient and their family in a moment. At the acute stage of the illness the efforts and attention of the medical personnel are concentrated on keeping a patient alive and stabilizing their vita...

Zastosowanie technik neurodynamicznych w codziennej pracy fizjoterapeuty

The most important element of every treatment modality, including a therapy using neurodynamic techniques, is to make a good diagnosis. Determining the cause of the disordered neuromechanics, which will allow to plan an...

Niestabilność dolnego odcinka kręgosłupa szyjnego – opis przypadku

The paper presents a comprehensive diagnostic and therapeutic management of the instability in the lower cervical spine in a young woman. The presented procedure is an effective and safe method of the therapy of the lowe...

Rehabilitacja pacjentów po złamaniu V kości śródstopia

About 30% of all bone injuries are foot bone injuries. Among these fractures one of the most common is the fracture of the fifth metatarsal, which is situated between the cuboid bone and the little finger. The injury con...

Zapalenie nadkłykcia bocznego kości ramiennej - diagnostyka i rehabilitacja

Lateral epicondylitis is a painful condition that usually occurs in middle-aged people. It is the result of overloads within the extensor tendons of the wrist, microinjuries and the formation of degenerative changes. Sym...

Download PDF file
  • EP ID EP311368
  • DOI -
  • Views 126
  • Downloads 0

How To Cite

inż. Adam Gramala, dr n. med. Adam Maksymilian Pogorzała, dr Tomasz Walczak, dr hab. inż. Paweł Drapikowski (2018). Zastosowanie programów obliczeniowych typu CAD w projektowaniu stopy protezowej. Rehabilitacja w Praktyce, 1(3), 22-26. https://europub.co.uk/articles/-A-311368