Ziegler-Natta catalysts for propylene polymerization – Interaction of an external donor with the catalyst
Journal Title: Polyolefins Journal - Year 2017, Vol 4, Issue 1
Abstract
The interaction of the external donor (propyltrimethoxysilane - PTMS) with titanium-magnesium catalysts (TMCs) containing dibutylphthalate (DBP) as internal donor, which were prepared in different ways, was studied by chemical analysis and infrared diffuse reflectance spectroscopy (DRIFTS). The chemical composition of the catalysts after their interaction with heptane solutions of PTMS, PTMS/AlEt3 or AlEt3 during 1h at 70°C showed that this interaction led to removal of both TiCl4 and DBP from the catalysts. The fractions of DBP and Ti extracted, as well as the amounts of PTMS and AlEt3 bound, depended on the method of synthesizing the catalysts. DRIFT spectroscopy data concerning the state of DBP in the catalysts, before and after treatment with heptane solutions of PTMS or PTMS/AlEt3 during 1h at 70°C, showed that PTMS could substitute both TiCl4 and DBP, while adsorbing on coordinatively unsaturated Ti and Mg ions in the catalyst. The presence of AlEt3 played a key role in the interaction of PTMS with the catalyst. Activity data for propylene polymerization showed that treatment of TMC catalysts with PTMS before polymerization led to a sharp activity decrease due to deactivation of active sites, while the interaction of the catalyst with PTMS in the presence of AlEt3 led only to a slight decrease of activity, probably due to deactivation of non-stereospecific active centers.
Authors and Affiliations
Valentina Nikolaevna Panchenko, Ludmila Viktorovna Vorontsova, Vladimir Aleksandrovich Zakharov
Keywords
Related Articles
- EP ID EP283189
- DOI 10.22063/POJ.2016.1385
- Views 98
- Downloads 0
The effect of high-energy electron beam on drawn and undrawn high density polyethylene fibers
HDPE monofilaments were obtained using different extruders and drawn by post-extruder equipments. After solidification, drawn and undrawn monofilaments (draw ratio 7:1) were irradiated with 10 MeV electron beams in air a...
Introduction of titanium species into fluorine-modified SiO2- supported Cr-V bimetallic catalyst for ethylene polymerization and ethylene/1-hexene copolymerization
Chromium-vanadium (Cr-V) bimetallic catalysts are prepared by the introduction of vanadium into the Phillips catalyst which is one of the most significant industrial ethylene polymerization catalysts for tuning the Phill...
Inhibition effect of polyvinyl butyral on crystallization of polypropylene
In this work, a series of polypropylene/polyvinyl butyral (PP/PVB) blends were prepared by melt-blending process, at PVB loadings 3 wt%, 10 wt%, and 30 wt%. The effects of PVB on crystallization behavior of PP were inves...
Effect of the synthesis conditions of titanium-magnesium catalysts on the composition, structure and performance in propylene polymerization
Supported catalysts synthesized via the interaction of Mg(OEt)2 with TiCl4 in the presence or absence of an internal stereoregulating donor (di-n-butyl phthalate), with different solvents (chlorobenzene, n-undecane, n-he...
Fouling mechanisms during protein microfiltration: The effects of protein structure and filtration pressure on polypropylene microporous membrane performance
A polypropylene microporous membrane (PPMM) was fabricated by thermally induced phase separation (TIPS) method. The effects of protein size and structure as well as filtration pressure on the membrane performance and fou...