A Medical Centrifuge System Based on the Switched Reluctance Motor
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2018, Vol 6, Issue 3
Abstract
A prototype medical centrifuge system based on switched reluctance motors (SRMs) is designed and realized in this study. Although medical centrifuge systems use asynchronous motors or motor structures with permanent magnets in general, an SRM had many advantages compared to other types of electrical motors is designed and used as a drive motor in the study. A driver unit to operate the system under desired conditions and all mechanical components are designed and manufactured in the study. Therefore, the study shows that the cost effective medical centrifuge systems can be produced with different technological specifications.
Authors and Affiliations
Nurettin ÜSTKOYUNCU, Osman EROĞUL
Keywords
Related Articles
- EP ID EP490836
- DOI 10.29109/gujsc.368371
- Views 76
- Downloads 0
Effect of Induction Surface Hardening on Fatigue Limit of Austempered Ductile Irons
In this study, the effect of induction surface hardening on the fatigue limit of austempered ductile iron was investigated. For this purpose, samples of grade GGG70 ductile iron were austenitized at 900°C for 90 minutes...
Design and Production of An Active Wrist Orthosis
This study aims design and production of an active wrist orthosis which could be used both for the rehabilitation and the continuance of daily and professional activities of patients having a tendon torn or inflammation...
Experimental Investigation of the Useful Use of Electricity in Thermoelectric Generators by Using Waste Flue Gas
As wiring up the many thermoelectric generators in serial, voltage can be increased and wiring up the parallel the current can be increased. In this work, experiment set has occured with thermoelectric generators. The ge...
The Effect of Heat Treatments on Alloying of Pre-mixed Al + 4.5 wt. % Cu Powders
In this study, 4.5 wt. % Cu powder was added to Al powder and mixed for 45 minutes to produce premixed metal powders. Premixed powders were compacted by cold pressing at 20 MPa. After that these samples were pressed at 5...
Applications of Layered Production in Aviation
Additive Manufacturing techniques are receiving a considerable attention in recent years. Nowadays the digital manufacturing (3D printing, additive manufacturing or rapid prototyping) is mentioned as 3rd industrial revol...