A Method to Address the Fixing of Sealing Deficiencies at the “Ostrovul Mic” Left Bank, “Râul Mare - Downstream” Water Development
Journal Title: HIDRAULICA - Year 2018, Vol 0, Issue 3
Abstract
The present paper proposes a method for approaching the remediation of sealing deficiencies from the left bank of Ostrovul Mic water reservoir at km1+300 (Raul Mare – Downstream water development) by executing a drain at the bottom of the side embankment downstream face. The results of the remedy are highlighted by checking the flow both as a permanent regime and as transitional regime hypothesis on a 2D numerical model.
Authors and Affiliations
Albert Titus CONSTANTIN, Gheorghe LAZAR, Alina-Ioana POPESCU-BUSAN, Serban-Vlad NICOARA
Keywords
Related Articles
- EP ID EP485619
- DOI -
- Views 162
- Downloads 0
Estimation of Water Infiltration at a Given Embankment Dam with Sealing Deficiencies by a 3D Numerical Model
The paper presents a way of studying the water infiltration at the Motru embankment Dam (river ballast fill, clay core sealing) by a 3D numerical model covering the deficient right supporting bank. Since due to sealing i...
Studying Transients in Water Supply Systems
Transient operating states occur in water supply systems under pressure. Transient operating states place such extreme loads on the pipes that they might cause burst water pipes, so to be able to avoid damages and operat...
Optimizing Air Flow Instilled in an Aeration Pool
The experiment is considering a case study for two municipal wastewater treatment plants that have been equipped with a new control system over a period of 10 months: 1) The experiment was carried out in parallel and the...
The 3D Geometry Reconstruction of a Scaled Axial Blade by Photogrammetry
The paper illustrates the Reverse Engineering of an axial blade geometry, who was scanned through Photogrammetry technique and processed with the following software packages: Agisoft Photoscan and Geomagic Design X; the...
Design and Optimization of Pressurized Toroidal LPG Fuel Tanks with Variable Section
This study addresses the design and optimization of the pressurized toroidal LPG fuel tanks with variable section used in automotive industry based on the finite element analysis (FEA) approaches, to model both thermal a...