A Review on Performance Improvement in the Weldment Regions of Chromium Manganese Stainless Steels (AISI 202 SS)
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2014, Vol 2, Issue 11
Abstract
AISI 304 stainless steel is widely used in forming applications because of its superior formability. The high nickel price in recent years prompted an investigation into the feasibility of replacing AISI 304 with AISI 202 in applications requiring comparable mechanical properties. AISI 202 stainless steel is similar to 304 but susceptible to stress corrosion cracking / intergranular corrosion and reduction in pitting corrosion resistance especially after welding. So the properties such as stress corrosion cracking, pitting corrosion must be improved in the weldment areas. Flux coating in the weldment areas can improve the above mentioned properties to a greater extent.
Authors and Affiliations
V. S. Vigneshvar, Dr. R. Sudhakaran
Keywords
Related Articles
- EP ID EP19108
- DOI -
- Views 269
- Downloads 7
H2S Gas Sensor at Room Temperature For SnO2-CuO Thick Film
The SnO2 and CuO powder mixed with different ratio and heated at 8000C and then this powder is used to prepared thick films by a screen – printing technique on glass substrate. The H2S gas sensing properties, particular...
A Literature Review on Implementing Security in Cloud Environment
In modern computing, Cloud computing is an important part of any small or large organization. Today cloud computing can be considered as a service, similar to the way that electricity is considered a service in urban ar...
Advanced Oxidation Processes and DDT Degradation Kinetics with H 2 O 2 /Sunlight
Advanced Oxidation Processes (AOPs) are a group of oxidation processes carried out to remove harmful persistent organic pollutants (POP) from water, which are otherwise very hard to remove. The last century saw a glut o...
A nondestructive sensing robot for crack detection and deck maintenance
Most of the developing countries, mainly depends on the public transport.It is important to maintain the roads and bridges to save the human life.Traditionally a human inspector visits the damage inroadshe/she will not...
Timing and Control Signals Generator in Radar Application by Using Spartan 3e.
This paper is to grant the architecture design and implementation of a software and hardware module appeal to Timing and Control Signal Generator (TCSG) for pulsed RADAR (Radio Detection and Ranging) application. Radar...