Acute effects of small changes in crank length on gross efficiency and pedalling technique during submaximal cycling
Journal Title: Journal of Science and Cycling - Year 2014, Vol 3, Issue 2
Abstract
Background: To the best of our knowledge, only four experimental studies analysed the influence of the crank length in the efficiency of energy consumption. No significant differences were found on metabolic cost while pedalling with crank lengths between 145 and 200 mm. None of these studies took into account changes in pedalling technique (kinetic and kinematic profile), which might affect both the efficiency of energy consumption and the muscular activity profile of the lower limb (Astrand, 1953: Arbeitsphysiologie, 15, 23-32; Klimt & Voigt, 1974: European Journal of Applied Physiology, 33, 315-326; Morris & Londeree, 1997: Canadian Journal of Applied Physiology, 22, 429-438; McDaniel et al, 2002: Journal of Applied Physiology, 93, 823-828). Purpose: The main purpose of this study was to assess the acute effects of small changes in crank length assumable by competitive cyclists (±5 mm) on metabolic cost and pedalling technique during submaximal cycling.Methods: Twelve well-trained road cyclists with a minimum of two years competing in cycling and training more than 3000 km participated in the study. They performed in a randomized order three sets of submaximal pedalling (150, 200 & 250W) at a constant cadence (90 rpm) using three commonly used crank lengths (preferred, +5 mm and -5 mm). Simultaneous physiological (oxygen uptake, respiratory exchange ratio, heart rate and gross efficiency) and biomechanical analyses of pedalling were performed (sagittal hip, knee and ankle angles obtained by 2D high-speed video; and torque exerted on the left and right cranks independently every 2º of a complete revolution). Two-way ANOVA with repeated measures was used to analyse the effect of the crank length and power output on biomechanical and physiological variables. Results: Non-significant effects of crank length on oxygen uptake, RER, heart rate and gross efficiency were found (p>0.05). There was a significant effect (p<0.001) of the crank length on maximum torque (longest cranks increased it between 1.0-2.3 N•m), minimum torque (longest cranks increased it between 1.0-2.2 N•m) and MFE (longest cranks decreased it between 1 0.9-1.9%). Longest cranks also increased (p<0.05) the flexion and range of motion of the hip (0.9-2.5°) and the knee (1.3-3.4°), whereas ankle joint was not affected. No significant effect crank length pedalling power output was found. Discussion: The main outcome of this study was that small changes in crank length at submaximal intensity and at constant cadence did not produce significant changes on the efficiency of energy consumption whereas significant changes on biomechanical variables (kinetics and kinematics) were produced. A longer crank decreased the MFE due to a greater minimum torque during the upstroke. Moreover, the flexion and the range of motion of the hip and the knee increased while ankle joint was not affected. Conclusions: In conclusion, kinematic and kinetic changes due to a longer crank were not significant enough to alter the efficiency of energy consumption, although future studies should investigate their long term effects on muscle coordinative pattern in distance events and on overuse injuries.
Authors and Affiliations
V Ferrer-Roca| High Performance Sport Centre (CAR), Sant Cugat del Vallés, Barcelona, Spain, V Rivero Palomo| Faculty of Physical Activity and Sports Sciences. Department of Physical Education. Institute of Biomedicine. University of León, Spain, A Ogueta-Alday| Faculty of Physical Activity and Sports Sciences. Department of Physical Education. Institute of Biomedicine. University of León, Spain, JA Rodríguez-Marroyo| Faculty of Physical Activity and Sports Sciences. Department of Physical Education. Institute of Biomedicine. University of León, Spain, J García-López| Faculty of Physical Activity and Sports Sciences. Department of Physical Education. Institute of Biomedicine. University of León, Spain
Keywords
Related Articles
- EP ID EP2845
- DOI -
- Views 357
- Downloads 22
Reliability of performance and associated physiological responses during simulated sprint-distance triathlon
Many different methods of simulating triathlon performance in controlled conditions have been developed without establishing the reliability of these assessments. The aim of this study was to determine the reliability of...
The effect of wheel diameter on vertical and horizontal mountain bike position
Background: Mountain bike wheel dimensions have evolved to larger diameters in recent years. While numerous claims can be found for performance advantages of larger diameter wheels, systematic comparisons of mechanical c...
Impact of Cycling Intensity on Cycle-run Transition in Female Triathletes
PURPOSE: The purpose of the study was to determine the impact of intensity during the final km of a cycling bout on subsequent run and overall cycle-run (CR) performance. A secondary aim of the study was to examine how...
The acute effect of whole-body vibration on cycling peak power output
The aim of the present study was to determine if an acute bout of whole-body vibration (WBV) prior to sprint cycling would increase peak power output. Ten male cyclists, all familiar with maximal sprint cycling exercise...
The Elimination Race in Track Cycling: Patterns and Predictors of Performance
The track cycling Omnium is a multi-event competition that has recently been expanded to include the Elimination Race (ER), which presents a unique set of physical and tactical demands. The purpose of this research was t...