Aging tests of polylactide/cellulose composites
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2017, Vol 100, Issue
Abstract
Aging tests of polylactide/cellulose composites. The aim of this study was to investigate the effect of the aging process on selected properties of polylactide composites filled with cellulose differing in particle size. The composites in the form of films were produced by pressing. Samples were subjected to the aging process following the EN ISO 9142:2003 standard. The aging process lasted 7 days and included heating with drying, heating with wetting and freezing. Samples were analysed using infrared Fourier transform spectroscopy. Moreover, colorimetric tests were applied to analyse colour of the materials. Aging tests showed an effect of cellulose filler molecule size on changes in colour of the composite materials.
Authors and Affiliations
Marta Babicka, Aleksandra GRZĄBKA-ZASADZIŃSKA, Izabela Ratajczak, Sławomir Borysiak
Keywords
Related Articles
- EP ID EP348332
- DOI -
- Views 82
- Downloads 0
Effect of molar ratio of melamine-urea-formaldehyde adhesive resins condensed no-waste method’s on the selected properties of the polycondensates during storage time III. Formaldehyde emission
Effect of molar ratio of melamine-urea-formaldehyde adhesive resins condensed no-waste method’s on the selected properties of the polycondensates during storage time. III. Formaldehyde emission. In presented article were...
The principles of design and analysis of exhaust and pneumatic transport systems of chipped wood
Principles of design and analysis of exhaust and pneumatic transport systems of chipped wood. The article presents results of a study of the selection of schemes and the tracing of pipes for exhaust and pneumatic transpo...
Surface roughness after machining of medium density fiberboards designed for deep milling
Surface roughness after machining of medium density fiberboards designed for deep milling. The article presents results of research of MDF for deep milling. Tests were carried out for 5 different boards available on the...
Strength and modulus of elasticity of thermally modified pine structural timber
Strength and modulus of elasticity of thermally modified pine structural timber. This paper presents the results of determination of some physical and mechanical properties of thermally modified pine (Pinus sylvestris L....
Thermal modification of lignocellulosic particles to obtain a solid biofuels with improved properties
Thermal modification of lignocellulosic particles to obtain a solid biofuels with improved properties. The aim of the study was to investigate the effect of the thermal pretreatment of lignocellulosic raw materials on th...