Effect of molar ratio of melamine-urea-formaldehyde adhesive resins condensed no-waste method’s on the selected properties of the polycondensates during storage time III. Formaldehyde emission
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2016, Vol 95, Issue
Abstract
Effect of molar ratio of melamine-urea-formaldehyde adhesive resins condensed no-waste method’s on the selected properties of the polycondensates during storage time. III. Formaldehyde emission. In presented article were discussed hygienic properties of beech three-plywood produced with the use of melamine-ureaformaldehyde resins (MUF) in function of molar ratio and storage time. Formaldehyde emission from plywoods accordingly to the requirements of standards PN-EN 717-1:2006 and PN-EN 717-3:1999 were tested. On the base of carried out tests it was stated, that storage time of MUF resin did not effect on the level of formaldehyde emission from the produced plywood. The increase of substrate molar ratio caused a higher formaldehyde emission.
Authors and Affiliations
Mariusz Jóźwiak
Keywords
Related Articles
- EP ID EP356878
- DOI -
- Views 102
- Downloads 0
The investigations on colour and gloss of lacquer coatings on impregnated pine wood
The study presents results of the thermal aging of lacquer coatings formed on impregnated pine wood with the Pinadur® system under the conditions of the test container procedure. The appearance, colour and gloss unit of...
Computertomograph und Bandsägen steigern Ausbeute in großen Sägewerken
Computertomograph und Bandsägen steigern Ausbeute in großen Sägewerken. In dem Referat wurde das erste Deutsche Sägewerk mit Computertomograph-Scanner und Bandsägen beschrieben. Es ist ein Sägewerk zum Einschnitt von Ele...
Formability of radial and tangential beech veneers
Formability radial and tangential beech veneers. The paper deals with the evaluation of 3D formability of radial and tangential veneers produced from beech (Fagus sylvatica L.). 3D formability was determined the method b...
Determination selected physical and mechanical properties of mukulungu wood Autranellacongolensis (de Wild.) A Chev.
Determination selected physical and mechanical properties of mukulungu wood Autranellacongolensis (de Wild.) A Chev. The main objective of this paper was to determine selected physical and mechanical properties of mukulu...
Changes of functional properties of materials used in wood industryafter ion implantation process
Changes of functional properties of materials used in wood industry after ion implantation process. The paper presents an information about real and potential application of ion implantation method in wood industry as re...