The principles of design and analysis of exhaust and pneumatic transport systems of chipped wood
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2017, Vol 98, Issue
Abstract
Principles of design and analysis of exhaust and pneumatic transport systems of chipped wood. The article presents results of a study of the selection of schemes and the tracing of pipes for exhaust and pneumatic transport systems of chipped wood. The theory and practice of determining the diameter of the pipe in the branches to ensure an increased functionality and energy efficiency in the design of exhaust systems in accordance with the developed TCP 510–2014 are also described.
Authors and Affiliations
SERGEI TROFIMOV, Tomasz Rogoziński
Keywords
Related Articles
- EP ID EP339261
- DOI -
- Views 70
- Downloads 0
Influence of ultraviolet radiation on colour of European ash sapwood and heartwood (Fraxinus excelsior L.)
Influence of ultraviolet radiation on colour of European ash sapwood and heartwood (Fraxinus excelsior L.). This paper examines the influence of ultraviolet radiation on the colour of ash wood, used principally as floor...
Качество поверхности древесностружечных плит в зависимости от температуры их прессования
Surface quality of particleboards depending on the temperature of their pressing. An increase of tem-perature of pressing of particleboards in the range from 180 to 240 оС leads to decreasing in density of the edge zones...
Analytical and experimental investigation of bending stresses in beech plywood
Analytical and experimental investigation of bending stresses in beech plywood. The paper presents an analysis of problems connected with the determination of strength parameters in layered wood-based laminate with trans...
Influence of Selected Parameters of the OSB Boards Cutting Process by the Mean of Abrasive Water Jet on Its Lag
Influence of Selected Parameters of the OSB Boards Cutting Process by the Mean of Abrasive Water Jet on Its Lag. The article is dealing with the issue of OSB boards cutting by water jet at the pressure of 400 MPa with ab...
Doping of urea-formaldehyde resin with quebracho tannin – the effect on bond shear strength and formaldehyde emission
Doping of urea-formaldehyde resin with quebracho tannin – the effect on bond shear strength and formaldehyde emission. A commercial urea-formaldehyde resin was blended with 1%wt and 10%wt of quebracho tannin. The effect...