AN ANALYSIS OF THE IMPACT OF THE FDM TECHNOLOGY PARAMETERS ON TRIBOLOGICAL PROPERTIES
Journal Title: Tribologia - Year 2018, Vol 281, Issue 5
Abstract
The paper presents the results of tribological tests for sample models made by FDM technology. The ringshaped samples were made of the ABS P430 material using the Dimension 1200es machine. Disc-shaped counter-samples were made of C45 steel. The analysed technological parameter of the process of building sample models was the “printing” direction (between the friction surface of the sample and the building platform), determined at three degrees of variability (0°, 45°, and 90°). Using the T-15 tribological tester of the ring-on- disc type, a study was carried out to determine the effect of printing direction on the friction force and the total friction wear. In addition, metrological measurements of the tested surfaces were carried out.<br/><br/>
Authors and Affiliations
Tomasz KOZIOR, Czesław KUNDERA
Keywords
Related Articles
- EP ID EP417496
- DOI 10.5604/01.3001.0012.7651
- Views 39
- Downloads 0
TRIBOLOGICAL BEHAVIOR OF THE FRICTION PAIR “GRADE 2/PE-UHMW” AND THE TECHNOLOGY OF THE PRODUCTION OF ITS SPHERICAL PART MADE OF GRADE 2
An advance in the material engineering of biomaterials intended for hip joint replacement prostheses is a very important social matter due to incurable diseases or injuries of human joints happening to many people. For t...
THE TRIBOLOGICAL PROPERTIES OF DLC COATINGS LUBRICATED WITH THE BIODEGRADABLE CUTTING FLUID
This paper presents the tribological results of diamond-like carbon DLC a type of a-C:H coating deposited on SW7M steel using the technique of chemical vapour deposition CVD. An observation of the coating structure was c...
Wpływ rodzaju fazy dyspergującej na właściwości tribologiczne smarów plastycznych
W artykule przedstawiono wyniki badań wpływu rodzaju fazy dyspergującej na właściwości smarne wybranych kompozycji smarowych. Do wytworzenia smarów plastycznych użyto mineralnej, syntetycznej oraz roślinnej bazy olejowej...
SLIDING WPŁYW TEKSTUROWANIA POWIERZCHNI NA OPORY TARCIA UKŁADU STAL–BRĄZ W WARUNKACH SMAROWANIA
Przeprowadzono badania tribologiczne w układzie rolka-klocek. Powierzchnie klocka (wycinka pierścienia) z brązu CuSn10P o twardości 138 HB zawierały sferyczne kieszenie smarowe uzyskane metodą wygniatania. Rolki wykonano...
A METHOD FOR THE DETERMINATION OF THE KINETIC FRICTION COEFFICIENT IN FRICTION PAIRS BASED ON DIRECT ACCELERATION MEASUREMENT OF AN OBJECT ON AN INCLINED PLANE
The paper presents and experimentally verifies a method for the determination of the kinetic friction coefficient of friction pairs. The method involves a direct acceleration measurement of an object sliding down an incl...