An Integration of Smart Grids with Demand Side Management and Renewable Energy: A Review
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 4
Abstract
The scheduling and improvement of the intelligible smart grid (SG) system is a combined part of the revolutionary target of accomplishing the distributed energy generation and transmission. The progression based on the fossil generation to the smart and renewable systems involves incorporation of innovative procedures at the utility as well as consumer end. It is evident from the present scenario that requirement of customer’s demand-side methods expanding at present, and also more prospects in this area are to be accomplished. This paper presents the integration of demand side management (DSM), demand response (DR) and renewable energy in SG systems. The existing literature on DR and DSM integration has been discussed by studying current and relevant publications of journals and conferences in this research area.
Authors and Affiliations
Bharti Koul, Kanwardeep Singh, Y. S. Brar
Keywords
Related Articles
- EP ID EP656092
- DOI 10.24247/ijmperdaug201986
- Views 90
- Downloads 0
Review of Current Technology in Glass Fibre Composite
The aim of this work is to study the properties of glass fibre using different types of compositions. In the present paper, we review the current scenario of manufacture and properties of GFRP. In the glass fibre composi...
Design and Development of Microstrip Sensor with Triple Frequency for Determination of Rice Grains Moisture Content
The micro strip moisture sensor is designed and developed with triple frequency, for determination of rice grain moisture content at 4.9GHz, 6.7GHz and 8GHz, with good return loss, as well as good bandwidth. The numerica...
DESIGN AND PERFORMANCE EVALUATION OF POLYHEDRAL SWEPT BACK HIGH WING CHUCK GLIDER FOR BETTER L/D RATIO
“It’s not flying its falling in style.” The chuck gliders are the ones which do not require any kind of thrust force since these do not have any mechanical or electrical power supply to it. For flying of such gliders, th...
Effect of Sintering Temperature on Mechanical Properties of Mg-Zr Alloy
Magnesium, Zirconium alloy is developed in three different sintering temperatures through powder metallurgy technique followed by hot extrusion in this work. The application of this material is for orthopedic implants. M...
Morphology Analysis and Corrosion Performance on Aluminum Zirconium Composite
The high strength aluminum alloy 5083 of composition 0.4Si 0.4Fe 0.1Cu 0.4Mn 4Mg 0.25 Zn 0.15Ti 0.05Cr and Al balance which has high yield strength of around 200 MPa and tensile strength of 300 MPa and good corrosion res...