An Investigation Of The Effects Of Solid Solution Temperature On The Wear Performance Of Aged AA7075 Alloy
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2018, Vol 6, Issue 1
Abstract
In this study, the effects of different solid solution temperatures (465 °C, 470 °C, 475 °C, 480 °C and 485 °C) before aging heat treatment on the microstructure and wear behaviors of AA7075 were investigated. Scanning electron microscope was used for microstructure examining of aged samples. Wear tests were performed on pin-on disc type wear device at 1.5 ms-1 sliding speed with four different sliding distance (500 m, 1000 m, 1500 m and 2000 m) under 30 N loads at room temperature. As a result of the study, the hardness values were increased with increasing solution temperature. In the wear tests, the lowest weight losses were determined in the solution treated at 485 °C and aged at 120 °C for 24 hours in AA7075 alloy. Generally, it was observed from worn SEM images that both abrasive and adhesive wear mechanisms were active.
Authors and Affiliations
Musa YILDIRIM, İjlal ŞİMŞEK, Dursun ÖZYÜREK
Keywords
Related Articles
- EP ID EP489690
- DOI 10.29109/http-gujsc-gazi-edu-tr.336024
- Views 91
- Downloads 0
Review of the Solid-State Transformers and an Application of Full Bridge DC/DC Converter
With the increased power to weight ratio, corresponding to the developments in material science, the demand for high frequency transformers (HFT) in air, land, marine and aerospace technologies where the weight is partic...
Design and construction of low cost sensor and GPS based autonomous unmanned ground vehicle
In recent years, unmanned vehicles have been quite popular for the researchers and those vehicles are still being developed by the researchers and engineers. Unmanned vehicle must do all operations without operator and m...
A New Window Function Based on Kaiser and Von-Hann Windows and its Performance Analysis for Digital Filter Design
Digital filters, which are used in many signal processing applications, can be classified as recursive or nonrecursive. Since nonrecursive digital filters can provide inherent stability and exact linear phase characteris...
Structural Analysis And Weight Optimization Of Recumbent Mouth And Calibrating Machine
In this study, basing on the structural analysis, the topology optimization of horizontal mouth opening and calibrating machine used for wheel rim production machine was analyzed and considering the critical values of Vo...
The Effect of Cutting Parameters on Machinability in Turning of Duplex 1.4462 Stainless Steels
In this study, effects of cutting parameters and cutting tool formation on machinability were examined in Dublex 1.4462 stainless steel in turning which is increasingly used due to its high mechanical properties. Experim...