An Investigation on Mechanical Properties and Microstructure of Mg/Al Alloys using Zn Interlayer during Diffusion Bonding

Abstract

The general prerequisites of a part in the mechanical, automobile and aviation have given many testing conditions. New materials can be found and manufactured to some valuable segments. This work is directed to get a better understanding and portrayal of the dispersion holding of comparative and different metals. This work goes for building up a basic strategy to get diffusion bonding joints at generally not ease. In diffusion bonding, two metal surfaces are united into contact at expanded temperatures under strain for a specific timeframe. It also aimed to obtain optimum parameters for diffusion bonding of zinc coating over aluminium alloy plate and magnesium alloy. These two metals are jointed inside the die after finishing surface treatment. Then the die is kept inside the diffusion bonding machine by varying the time, temperature, pressure by means of load. Diffusion bonding equipment is fabricated and verified with experiments so that it is capable of rendering accurate diffusion bonding joints with facilities to measure parameters and to investigate the super plastic diffusion bonding joints with interlayer. This method is devised to study the mechanical and metallurgical characteristics of the joint.

Authors and Affiliations

R. J. Golden Renjith Nimal, M. Sivakumar, G. Esakkimuthu

Keywords

Related Articles

Design and Simulation of Double Wishbone (SLA) Suspension Geometry

Widely all the incoming new era of the cars uses short and long arm dual wishbone suspension geometry system, due to its ability to perform individually without affecting the other wheel of suspension system and also to...

Design and Simulation of Connecting Rods with Several Test Casesusing Al Alloys and High Tensile Steel

The connecting rods designed recently are made from cast iron and carbon steel, which possess less tensile strength, toughness and durability. To improve such concern, this work aims in designing and analyzing the connec...

Increasing the Productivity by using Work Study in a Manufacturing Industry - Literature Review

Productivity increase by means of a work study in a manufacturing industry is the area of interest in this project. The project was conducted life live, where in numerous types of tools and techniques were employed to im...

Current Order and Inventory Models in Manufacturing Environments: A Review from 2008 to 2018

One of the issues of designing a supply chain network is "Supply chain ordering management ". Extra costs are the most important factors in the survival of an organization and have a significant impact on the company’s c...

Evaluation of Mechanical Properties of Treated Hybrid Particulate Reinforced Polyester Composites

In recent years, natural fibers along with mineral fillers are being used to fabricate hybrid composites to achieve enhanced mechanical properties. In this paper, the fabrication and mechanical characterization of novel...

Download PDF file
  • EP ID EP612014
  • DOI 10.24247/ijmperdjun201913
  • Views 68
  • Downloads 0

How To Cite

R. J. Golden Renjith Nimal, M. Sivakumar, G. Esakkimuthu (2019). An Investigation on Mechanical Properties and Microstructure of Mg/Al Alloys using Zn Interlayer during Diffusion Bonding. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ), 9(3), 125-130. https://europub.co.uk/articles/-A-612014